Learn more about MATLAB

Evaluating Expressions

On this page…
Find Alternatives to Using eval Assigning to a Series of Variables Short-Circuit Logical Operators Changing the Counter Variable within a for Loop

Find Alternatives to Using eval

While the eval function can provide a convenient solution to certain programming challenges, it is best to limit its use. The main reason is that code that uses eval is often difficult to read and hard to debug. A second reason is that eval statements cannot always be translated into C or C++ code by the MATLAB Compiler.

If you are evaluating a function, it is more efficient to use feval than eval. The feval function is made specifically for this purpose and is optimized to provide better performance.

For more information: See MATLAB Technical Note 1103, "What Is the EVAL Function, When Should I Use It, and How Can I Avoid It?" at URL http://www.mathworks.com/support/tech-notes/1100/1103.html.

Back to Top

Assigning to a Series of Variables

One common pattern for creating variables is to use a variable name suffixed with a number (e.g., phase1, phase2, phase3, etc.). We recommend using a cell array to build this type of variable name series, as it makes code more readable and executes more quickly than some other methods. For example:

for k = 1:800
   phase{k} = expression;
end

Back to Top

Short-Circuit Logical Operators

MATLAB has logical AND and OR operators (&& and ||) that enable you to partially evaluate, or short-circuit, logical expressions. Short-circuit operators are useful when you want to evaluate a statement only when certain conditions are satisfied.

In this example, MATLAB does not execute the function myfun unless its M-file exists on the current path.

comp = (exist('myfun.m') == 2) && (myfun(x) >= y)

For more information: See Short-Circuit Operators in the MATLAB Programming Fundamentals documentation.

Back to Top

Changing the Counter Variable within a for Loop

You cannot change the value of the loop counter variable (e.g., the variable k in the example below) in the body of a for loop. For example, this loop executes just 10 times, even though k is set back to 1 on each iteration.

for k = 1:10
   fprintf('Pass %d\n', k)
   k = 1;
end

Although MATLAB does allow you to use a variable of the same name as the loop counter within a loop, this is not a recommended practice.

Back to Top

Strings

MATLAB Path

© 1984-2009- The MathWorks, Inc.    -   Site Help   -   Patents   -   Trademarks   -   Privacy Policy   -   Preventing Piracy   -   RSS