View full documentation for this product with your MathWorks Account.
Login now or create an account. You gain additional benefits such as trial software downloads, online service requests and tracking, and bug reports.
| Target Support Package™ IC1 | |
Block Reference |  Alphabetical List |
|
|
| C166 Resource Configuration | Support device configuration for Infineon® C166® microcontrollers |
| Serial Receive | Configure C166® microcontroller for serial receive |
| Serial Transmit | Configure Infineon® C166® microcontroller for serial transmit |
| CAN Bus Status | Output Bus Off or Error Warning state of CAN module |
| CAN Calibration Protocol (C166) | Implement CAN Calibration Protocol (CCP) standard |
| CAN Receive | Receive CAN messages from CAN module on Infineon® C166® microcontrollers |
| CAN Reset | Reset CAN module |
| CAN Transmit | Transmit CAN messages via CAN module on Infineon® C166® microcontrollers |
For information about CAN message blocks and
CAN drivers, see the CAN Blockset Reference.
| C-CAN Receive | Receive CAN messages from C-CAN module on ST10 microcontrollers |
| C-CAN Transmit | Transmit CAN messages via C-CAN module on ST10 microcontrollers |
| CAN Calibration Protocol (C166, C-CAN) | Implement CAN Calibration Protocol (CCP) standard with C-CAN |
For information about CAN message blocks and
CAN drivers, see the CAN Blockset Reference.
| C166 Execution Profiling via ASC0 | Provide serial interface to execution profiling engine |
| C166 Execution Profiling via C-CAN 1 | Provide CAN interface to execution profiling engine via C-CAN channel 1 on ST10 microcontrollers |
| C166 Execution Profiling via CAN A | Provide CAN interface to execution profiling engine via CAN channel A |
| C166 Execution Profiling via TwinCAN A | Provide CAN interface to execution profiling engine via TwinCAN channel A for XC16x variants of Infineon® C166® microcontrollers |
| CAN Calibration Protocol (C166, TwinCAN) | Implement CAN Calibration Protocol (CCP) standard for XC16x variants of Infineon® C166® microcontrollers |
| TwinCAN Bus Status | Output Bus Off or Error Warning state of a CAN node on XC16x variants of Infineon® C166® microcontrollers |
| TwinCAN Receive | Receive CAN messages via TwinCAN module on XC16x variants of Infineon® C166® microcontrollers |
| TwinCAN Reset | Reset CAN node on XC16x variants of Infineon® C166® microcontrollers |
| TwinCAN Transmit | Transmit CAN messages from TwinCAN module on XC16x variants of Infineon® C166® microcontrollers |
| Fast External Interrupt | Generate asynchronous function-call trigger when interrupt occurs |
| Switch External Mode Configuration | Configure model for external mode or executable building |
| Switch Target Configuration | Configure model and Target Preferences to one of a set of predefined hardware configurations |
| Digital In | Digital input driver that reads value of specified port or pin number |
| Digital Out | Digital output driver that sets logical state of specified pin |
For information about CAN message blocks and CAN drivers, see the CAN Blockset Reference.
| Multitasking Demo Model | Blocks — Alphabetical List | |
| © 1984-2008- The MathWorks, Inc. - Site Help - Patents - Trademarks - Privacy Policy - Preventing Piracy - RSS |