Target Support Package™ IC1

Switch Target Configuration - Configure model and Target Preferences to one of a set of predefined hardware configurations

Library

Target Support Package IC1/ C166 Driver Library/ Utilities

Description

Place the Switch Target Configuration block in your model and double-click it to run a convenience function that configures your model and Target Preferences to one of a set of predefined configurations. The Embedded IDE Link TS Option Set Selection dialog box appears, and you must choose a configuration for your processor type from the list. The suffixes '_hw' and '_sim' mean hardware or instruction set simulator. See Option Sets in the Embedded IDE Link TS documentation for more information.

The predefined configurations include settings for

• Phytec phyCORE-167 ST10F269

• Phytec phyCORE-167 C167CS

• Phytec kitCON-167 C167CR

• Infineon XC167CI Starter Kit

The option set xc167ci_hw_usb is for USB wiggler connection to the XC167CI.

Note   You must change jumper 501 when switching between USB wiggler and on-board parallel port wiggler for this target.

Switch External Mode Configuration

TwinCAN Bus Status