Section Overview

  Opening the Model

  Overview of the Model

  Quadrature Amplitude Modulation

  Running a Simulation

  Displaying the Error Rate

  Setting Block Parameters

  Displaying a Plot of Phase Noise

  More Demos

  Section Overview

  Using commstartup to Set Simulation Parameters

  Opening a New Model Window

  Opening Block Libraries

  Moving Blocks into the Model Window

  Connecting Blocks

  Setting Block Parameters

  Setting Simulation Parameters

  Running the Model

  Adding Noise to the Model

  Saving a Model

  Frames and Frame-Based Processing

  Discrete Signals and Sample Times

  Continuous Signals

  Section Overview

  Overview of the Model

  Selecting Blocks for the Channel Noise Model

  Setting Parameters in the Channel Noise Model

  Connecting the Blocks

  Running the Channel Noise Model

  Section Overview

  Building the Hamming Code Model

  Using the Hamming Encoder and Decoder Blocks

  Setting Parameters in the Hamming Code Model

  Labeling the Display Block

  Running the Hamming Code Model

  Displaying Frame Sizes

  Adding a Scope to the Model

  Setting Parameters in the Expanded Model

  Observing Channel Errors with the Scope

  Section Overview

  Building the BPSK Model

  Setting Parameters in the BPSK Model

  Running the BPSK Model

  Section Overview

  Building the Cyclic Code Model

  Running the Cyclic Code Model

  Verifying the Symbol Period

  Using a Probe Block to Determine Symbol Period

  Section Overview

  Building the FSK Model

  Setting Parameters in the FSK Model

  Running the FSK Model

  Learning About Delays in the Model

  Finding the Delay in a Model

  Learning About Multirate Models

  Using Sample Time Colors to Check Sample Times

  Section Overview

  Building the Convolutional Code Model

  Understanding the Blocks in the Model

  Setting Parameters in the Convolutional Code Model

  Running the Convolutional Code Model

  Section Overview

  Using a Signal To Workspace Block

  Configuring the Signal To Workspace Block

  Viewing the Error Rate Data in the Workspace

  Sending Signal and Error Data to the Workspace

  Viewing the Signal and Error Data in the Workspace

  Analyzing Signal and Error Data

  Section Overview

  Running a Single Simulation

  Running Multiple Simulations

  Plotting the Results of Multiple Simulations

  Running Multiple Simulations Using BERTool

  Section Overview

  Simulating a Signal by Importing Data

  Simulating Noise with Imported Data

  Simulating Noise with Specified Error Patterns

  Setting Sample Times and Samples per Frame

  Online Help

  Demos

  The MathWorks Online