Learn more about Instrument Control Toolbox

Working with the GPIB Interface

On this page…
Understanding VISA-GPIB Creating a VISA-GPIB Object VISA-GPIB Address

Understanding VISA-GPIB

The GPIB interface is supported through a VISA-GPIB object. The features associated with a VISA-GPIB object are similar to the features associated with a GPIB object. Therefore, only functions and properties that are unique to VISA's GPIB interface are discussed in this section.

Refer to Controlling Instruments Using GPIB, to learn about the GPIB interface, writing and reading text and binary data, using events and callbacks, using triggers, and so on.

Note   The VISA-GPIB object does not support the spoll function, or the BusManagementStatus, CompareBits, and HandshakeStatus properties.

Back to Top

Creating a VISA-GPIB Object

You create a VISA-GPIB object with the visa function. Each VISA-GPIB object is associated with

• A GPIB controller installed in your computer

• An instrument with a GPIB interface

visa requires the vendor name and the resource name as input arguments. The vendor name can be agilent, ni, or tek. The resource name consists of the GPIB board index, the instrument primary address, and the instrument secondary address. You can find the VISA-GPIB resource name for a given instrument with the configuration tool provided by your vendor, or with the instrhwinfo function. (In place of the resource name, you can use an alias as defined with your VISA vendor configuration tool.) As described in Connecting to the Instrument, you can also configure properties during object creation.

Before you create a VISA object, you must find the instrument in the appropriate vendor VISA explorer. When you find the instrument configured, note its VISA resource string and create the object using that information.

For example, to create a VISA-GPIB object associated with a National Instruments controller with board index 0, and a Tektronix TDS 210 digital oscilloscope with primary address 1 and secondary address 0,

vg = visa('ni','GPIB0::1::0::INSTR');

The VISA-GPIB object vg now exists in the MATLAB workspace.

To open a connection to the instrument type:

fopen (vg);

You can then display the class of vg with the whos command.

whos vg
  Name      Size         Bytes  Class

  vg        1x1            884  visa object

Grand total is 16 elements using 884 bytes

After you create the VISA-GPIB object, the following properties are automatically assigned values. These properties provideinformation about the object based on its class type and address information.

VISA-GPIB Descriptive Properties

Property Name	Description
Name	Specify a descriptive name for the VISA-GPIB object.
RsrcName	Indicate the resource name for a VISA instrument.
Type	Indicate the object type.

You can display the values of these properties for vg with the get function.

get(vg,{'Name','RsrcName','Type'})
ans = 
'VISA-GPIB0-1'    'GPIB0::1::0::INSTR'    'visa-gpib'

VISA-GPIB Object Display

The VISA-GPIB object provides a convenient display that summarizes important address and state information. You can invoke the display summary as follows:

• Type the VISA-GPIB object at the command line.

• Exclude the semicolon when creating a VISA-GPIB object.

• Exclude the semicolon when configuring properties using dot notation.

You can also display summary information via the Workspace browser by right-clicking an instrument object and selecting Display Summary from the context menu.

The display summary for the VISA-GPIB object vg is given below.

VISA-GPIB Object Using NI Adaptor : VISA-GPIB0-1

Communication Address 
   BoardIndex:         0
   PrimaryAddress:     1
   SecondaryAddress:   0

Communication State 
   Status:             closed
   RecordStatus:       off

Read/Write State  
   TransferStatus:     idle
   BytesAvailable:     0
   ValuesReceived:     0
   ValuesSent:         0

Back to Top

VISA-GPIB Address

The VISA-GPIB address consists of

• The board index of the GPIB controller installed in your computer.

• The primary address and secondary address of the instrument. Valid primary addresses range from 0 to 30. Valid secondary addresses range from 0 to 30, where the value 0 indicates that the secondary address is not used.

You must specify the primary address value via the resource name during VISA-GPIB object creation. Additionally, you must include the board index and secondary address values as part of the resource name if they differ from the default value of 0.

The properties associated with the GPIB address are given below.

VISA-GPIB Address Properties

Property Name	Description
BoardIndex	Specify the index number of the GPIB board.
PrimaryAddress	Specify the primary address of the GPIB instrument.
SecondaryAddress	Specify the secondary address of the GPIB instrument.

The BoardIndex, PrimaryAddress, and SecondaryAddress properties are automatically updated with the specified resource name values when you create the VISA-GPIB object.

You can display the address property values for the VISA-GPIB object vg created in Creating a VISA-GPIB Object with the get function.

get(vg,{'BoardIndex','PrimaryAddress','SecondaryAddress'})
ans = 
    [0]    [1]    [0]

Back to Top

VISA Overview

Working with the VXI Interface

© 1984-2009- The MathWorks, Inc.    -   Site Help   -   Patents   -   Trademarks   -   Privacy Policy   -   Preventing Piracy   -   RSS