| Version 1.2 (R14SP3) RF Blockset™ Software Release Notes | |
This table summarizes what's new in V1.2 (R14SP3):
| New Features and Changes | Version Compatibility Considerations | Fixed Bugs and Known Problems | Related Documentation at Web Site |
|---|---|---|---|
| Yes Details below | No | Bug
Reports at Web site | No |
New features and changes introduced in this version are:
An RLCG Transmission Line block has been added to the Transmission Lines sublibrary of the Physical library. This block lets you model RLCG transmission lines.
The Transmission Line block's Characteristic impedance, Phase velocity (m/s), and Loss (dB/m) parameters can now be frequency dependent.
You can now create system budget plots from the Output Port block.
The blockset checks that the small signal gain calculated from the Pin/Pout data is the same as the gain (S21) calculated from the S-parameters. If it is not, the blockset adjusts the Pin/Pout curve so that the small signal gain is the same as S21.
The Max length of impulse response parameter has been renamed to Finite impulse response filter length. This change affects the Input Port, Lowpass RF Filter, Highpass RF Filter, Bandpass RF Filter, and Bandstop RF Filter blocks. The block behavior remains the same.
The error and warning messages issued by the blockset are more descriptive.
The RF Blockset demos have new documentation and can be accessed using an improved interface.
| Version 1.3 (R2006a) RF Blockset Software | Version 1.1 (R14SP2) RF Blockset Software | |
| © 1984-2008- The MathWorks, Inc. - Site Help - Patents - Trademarks - Privacy Policy - Preventing Piracy - RSS |