Introduction
Overview
This chapter describes how to use the Data
Acquisition Toolbox elements with the SystemTest software.
The Data Acquisition Toolbox elements
provide a way to bring analog and digital data from a data acquisition
device into a SystemTest test,
or to send analog or digital data from your device. You can use these
elements along with the other elements in the SystemTest software
to create tests for Simulink models
and other applications.
Note
To use the Data Acquisition Toolbox elements,
you need a license for the Data Acquisition
Toolbox software. These four elements will not appear
in the SystemTest software without
this license. |
Back to Top
Data Acquisition Toolbox Test
Elements
The Data Acquisition Toolbox software
provides four elements that you can use in the SystemTest software:
Analog Input — For reading analog data from
your data acquisition device
Analog Output — For sending analog data to
your data acquisition device
Digital Input — For reading digital data from
your data acquisition device
Digital Output — For sending digital data to
your data acquisition device
You can configure each test element to communicate with your
data acquisition devices for sending or receiving digital or analog
data.
Back to Top
 | Using the Data Acquisition
Toolbox Elements | | Example: Testing a Voltage Regulator |  |
Includes the most popular MATLAB recorded presentations with Q&A sessions led by MATLAB experts.
Get the Interactive Kit
Store 
