Embedded IDE Link™ TS

Supported Altium^® TASKING^® Toolsets

Supported Versions

Embedded IDE Link™ TS software includes at least one reference template project for each supported toolset. The reference projects were created for specific versions of each Altium^® TASKING^® toolset and were used by The MathWorks for qualification testing. The supported toolset versions are:

• Infineon^® TriCore^®: TASKING VX-toolset for TriCore v2.5 r2

  See also Regenerate Template Projects to Use Selected Toolset Versions.

• Infineon^® C166^®: TASKING Tools for C166/ST10 v8.7 r1

• Renesas^® M16C: TASKING Tools for M16C v3.1 r1 patch 2

• ARM^®: TASKING C Compiler for ARM v2.0 r2

  Simulator only, see On-Chip Debugging/On-Chip PIL Not Supported on ARM Hardware.

• Freescale™ DSP563xx: TASKING Tools for DSP563xx v3.5 r3 patch 2

• 8051: TASKING Tools for 8051 v7.2 r1

The Renesas R8C family is supported by the Renesas M16C TASKING Toolset.

The Freescale DSP566xx family is supported by the Freescale DSP563xx Toolset.

Back to Top

Support for Other Versions

Check the Embedded IDE Link TS Product Support page for patches and additional toolchain version information.

For minor release increments it may be sufficient to create new default template projects. To do this,

1. Specify the location of your TASKING toolset in the Target Preferences (see Setting Target Preferences).

2. Close all projects/project spaces in the EDE, and close the EDE.

3. Move to a clean work directory or clean out the existing one.

4. Run the tasking_generate_templates command. You must specify your configuration description string, e.g.:

   tasking_generate_templates('C166', true)

   or

   tasking_generate_templates('TriCore', true)

Note   Make sure you check the Embedded IDE Link TS Product Support page for the latest information about toolchains qualified with the product. You may be able to obtain patches in order to use other toolsets.

Regenerate Template Projects to Use Selected Toolset Versions

The following toolsets should work after regenerating the template projects:

• TASKING VX-toolset for TriCore and PCP v2.5 r2

• As TASKING VX-toolset for TriCore v2.5 r2 but without On-Chip Debug Support (OCDS)

• "TASKING C/C++ Compiler for ARM v2.0 r2"

Some TASKING packages do not include On-Chip Debug Support (OCDS). For example, "TASKING C/C++, CrossView Pro SIM" does not include OCDS support, but "TASKING VX-Toolset" does. To use a package without OCDS support you must regenerate the template projects as previously described.

Back to Top

Product Overview

Using This Guide