Target Support Package™ TC2

Clarke Transformation - Convert balanced three-phase quantities to balanced two-phase quadrature quantities

Library

c28xdmclib in Target Support Package TC2 software

Description

This block converts balanced three-phase quantities into balanced two-phase quadrature quantities. The transformation implements these equations

and is illustrated in the following figure.

The inputs to this block are the phase a (As) and phase b (Bs) components of the balanced three-phase quantities and the outputs are the direct axis (Alpha) component and the quadrature axis (Beta) of the transformed signal.

The instantaneous outputs are defined by the following equations and are shown in the following figure:

The variables used in the preceding equations and figures correspond to the variables on the block as shown in the following table:

Note   The implementation of this block does not call the corresponding Texas Instruments library function during code generation. The TI function uses a global Q setting and the MathWorks code used by this block dynamically adjusts the Q format based on the block input. See About the IQmath Library for more information.

Dialog Box

References

For detailed information on the DMC library, see C/F 28xx Digital Motor Control Library, Literature Number SPRC080, available at the Texas Instruments website.

See Also

Inverse Park Transformation, Park Transformation, PID Controller, Space Vector Generator, Speed Measurement

C28x Watchdog

Custom Board