Target Support Package™ TC2

Inverse Park Transformation - Convert rotating reference frame vectors to two-phase stationary reference frame

Library

c28xdmclib in Target Support Package TC2 software

Description

This block converts vectors in an orthogonal rotating reference frame to a two-phase orthogonal stationary reference frame. The transformation implements these equations:

and is illustrated in the following figure.

The inputs to this block are the direct axis (Ds) and quadrature axis (Qs) components of the transformed signal in the rotating frame and the phase angle (Angle) between the stationary and rotating frames.

The outputs are the direct axis (Alpha) and the quadrature axis (Beta) components of the transformed signal.

The variables used in the preceding figure and equations correspond to the block variables as shown in the following table:

Note   The implementation of this block does not call the corresponding Texas Instruments library function during code generation. The TI function uses a global Q setting and the MathWorks code used by this block dynamically adjusts the Q format based on the block input. See About the IQmath Library for more information.

Dialog Box

References

For detailed information on the DMC library, see C/F 28xx Digital Motor Control Library, Literature Number SPRC080, available at the Texas Instruments website.

See Also

Clarke Transformation, Park Transformation, PID Controller, Space Vector Generator, Speed Measurement

Integer part IQN x int32

IQN to Float