| Target Support Package™ TC6 | |
C6416 DSK Board Support in Target Support Package TC6 software
Adding the C6416 DSK LED block to your Simulink block diagram lets you trigger the user light emitting diodes (LED) on the C6416 DSK. To use the block, send a nonzero real scalar to the block. The C6416 DSK LED block controls all four User LEDs located on the C6416 DSK.
When you add this block to a model, and send an integer to the block input, the block sets the LED state based on the input value it receives:
When the block receives an input value equal to 0, the specified LEDs are turned off (disabled), 0000
When the block receives a nonzero input value, the specified LEDs are turned on (enabled), 0001 to 1111
To activate the block, send it an integer in the range 0 to 15. Vectors do not work to activate LEDs; nor do complex numbers as scalars or vectors.
For example, sending the value 6 turns on the diodes to show 0110 (off/on/on/off). 13 turns on the diodes to show 1101.
All LEDs maintain their state until the C6416 DSK LED block receives an input value that changes the state. Enabled LEDs stay on until the block receives an input value that turns the LEDs off; disabled LEDs stay off until turned on. Resetting the C6416 DSK turns off all User LEDs. When you start an application, the LEDs are turned off by default.
This dialog does not have any user-selectable options.
| C6416 DSK DIP Switch | C6416 DSK Reset | |
| © 1984-2009- The MathWorks, Inc. - Site Help - Patents - Trademarks - Privacy Policy - Preventing Piracy - RSS |