Fixed-Point Blockset

fixpt_convert_prep

Prepare a Simulink model for more complete conversion to fixed-point data types

Syntax

• fixpt_convert_prep('SystemName')
  

Description

fixpt_convert_prep('SystemName') prepares the Simulink model or subsystem specified by SystemName for more complete conversion (less encapsulation) to fixed-point data types using the fixpt_convert function. It does so by replacing this select set of blocks:

• Old style Latch blocks

• Old style Latch blocks are replaced with a version contained in the fixpt_convert_lib library. The old style Latch block contains a Transport Delay block, which is a very inefficient implementation for both floating-point and fixed-point data types.

• Function blocks acting like selectors

• Function blocks acting like selectors are replaced with the Selector block. Function blocks acting like selectors require that you specify the width of the input. To get this information, the model must be put into compile mode, which is inefficient.

• A select set of additional function blocks

• You can replace function blocks that have replacements in the fixpt_convert_lib library. Alternatively, you can use fixpt_convert_prep as a prototype for creating a customized list of function blocks to be replaced. To do this, copy the function and the library to another directory, and then customize the library to include function blocks that you commonly encounter when converting models from floating point to fixed point.

Note    This function is meant to be a starting point for customizing the Simulink to Fixed-Point Blockset conversion process.

See Also

fixpt_convert

fixpt_convert

fixpt_interp1