Embedded Target for Texas Instruments C6000 DSPs

Creating Your Simulink Model for Targeting

You create real-time digital signal processing models the same way you create other Simulink models--by combining standard DSP blocks and C-MEX S-functions.

You add blocks to your model in several ways:

• Use blocks from the DSP Blockset
• Use blocks from the fixed-point blocks library TI C62x DSPLIB
• Use other Simulink discrete-time blocks
• Use the blocks provided in the C6000 blockset: ADC, DAC, LED and Reset blocks for specific supported target hardware
• Use blocks that provide the functions you need from any blockset installed on your computer
• Create and use custom blocks

Once you have designed and built your model, you generate C code and build the real-time executable by clicking Build on the Real-Time Workshop pane of the Simulation Parameters dialog. The automatic build process creates the file modelname.out containing a real-time model image in COFF file format that can run on your target.

The file modelname.out is an executable whose format is target specific. You can load the file to your target and execute it in real time. Refer to your Real-Time Workshop documentation for more information about the build process.

Notes About Selecting Blocks for Your Models

Many blocks in the blocksets communicate with your MATLAB workspace. All the blocks generate code, but they do not work as they do on your desktop--they waste time waiting to send or receive data from your workspace, slowing your signal processing application without adding instrumentation value.

For this reason, we recommend you avoid using certain blocks, such as the Scope block and some source and sink blocks, in Simulink models that you use on Embedded Target for TI C6000 DSP targets. In the next table, we present the blocks you should not use in your target models.

Block Name/Category	Library	Description
Scope	Simulink, DSP Blockset	Provides oscilloscope view of your output. Do not use the Save data to workspace option on the Data history pane in the `Scope' parameters dialog.
To Workspace	Simulink	Return data to your MATLAB workspace.
From Workspace	Simulink	Send data to your model from your MATLAB workspace.
Spectrum Scope	DSP Blockset	Compute and display the short-time FFT of a signal. It has internal buffering that can slow your process without adding value.
To File	Simulink	Send data to a file on your host machine.
From File	Simulink	Get data from a file on your host machine.
Triggered to Workspace	DSP Blockset	Send data to your MATLAB workspace.
Signal To Workspace	DSP Blockset	Send a signal to your MATLAB workspace.
Signal From Workspace	DSP Blockset	Get a signal from your MATLAB workspace.
Triggered Signal From Workspace	DSP Blockset	Get a signal from your MATLAB workspace.
To Wave device	DSP Blockset	Send data to a .wav device.
From Wave device	DSP Blockset	Get data from a .wav device.
To Wave file	DSP Blockset	Send data to a .wav file.
From Wave file	DSP Blockset	Get data from a .wav file.

In general, using blocks to add instrumentation to your application is a valuable tool. In most cases, blocks you add to your model to display results or create plots, such as Histogram blocks, add to your generated code without affecting your running application.

When you need to send data to or receive data from your target, use the To Rtdx and From Rtdx blocks to accomplish the data transfer.

Testing Your C6701 EVM

C6701 EVM Tutorial 2-1--Single Rate Application