MATLAB Examples

SetLedsAll.m demo example.

Description: This example shows Engduino LEDs 'setLedsAll' function call. Function requires input vector length 1, representing colour of all the RGB LED on the Engduino board.

July 2015, Engduino team: support@engduino.org

Contents

Initialize variables

% Check if the Engduino object already exists. Otherwise initialize it.
if (~exist('e', 'var'))
    % Create Engduino object and open COM port. You do not need to select
    % an active COM port, as it should be detected automatically. However,
    % in the case of unsuccessful connection, you may initialize Engduino
    % object with passing the active COM port. E.g. e = engduino('COM8');
    % To open the 'Bluetooth' port you need to initialize the Engduino
    % object with the 'Bluetooth' keyword and your Bluetooth device name.
    % E.g. e = engduino('Bluetooth', 'HC-05'); Demo mode can be enabled by
    % initialize the Engduino object with 'demo' keyword. E.g. e =
    % engduino('demo');
    e = engduino();
end

Main

Set a colour for all the 16 LEDs on Engduino

% Function 'setLedsAll' takes vector of 1 values between [0-7]. Colours are
% defined in engduino object as:
%     COLOR_RED =     0
%     COLOR_GREEN =   1
%     COLOR_BLUE =    2
%     COLOR_YELLOW =  3
%     COLOR_MAGENTA = 4
%     COLOR_CYA =     5
%     COLOR_WHITE =   6
%     COLOR_OFF =     7
e.setLedsAll(e.COLOR_GREEN);

Alternative method to set colour using integers

e.setLeds(1);