MATLAB Examples

Generating a Test Results Report

Report test results for a baseline test. Copyright 2015 The MathWorks, Inc.


This example shows how to generate a test results report from the test manager using a baseline test case. The model used for this example is sltestTestManagerReportsExample, which is a modified version of a shipping Simulink® demo called sldemo_absbrake. See sldemo_absbrake for details. Switch to a directory with write permissions.

Load and run the test file

Load and run the test file programmatically using the test manager. The test file contains a baseline test case that fails when it is run. The baseline criteria specified in the baseline test case does not match the model simulation, which makes the test case fail.

exampleFile = fullfile(matlabroot, ...
                       'toolbox', 'simulinktest', 'simulinktestdemos', ...
baselineObj =;
ans =

  0x0 empty cell array

Generate the report

Generate a report of the test case results using the results set object. The report is saved as a ZIP and will show all test results. The report opens when it is completed.,'','IncludeTestResults',0, 'IncludeComparisonSignalPlots', true);

View the report when it is finished generating. Notice that the overall baseline test case fails. The signals in baseline criteria do not match, which causes the test failure. You can view the signal comparison plots in the report to verify the failure.