g.tec Support from Data Acquisition Toolbox

Create your own waveforms, measurement and analysis routines, and applications for g.tec hardware using MATLAB and Data Acquisition Toolbox.

Guger Technologies (g.tec) manufactures high accuracy biosignal amplifier and acquisition/processing systems and multimodal biosignal data recorders. Use MATLAB® as your single software environment to create your own waveforms, measurement and analysis routines, and automated instrument applications for g.tec hardware.

MATLAB supports g.tec hardware through Data Acquisition Toolbox™. Specifically, it supports this hardware by downloading and using an adaptor API for the g.MOBIlab+ or g.USBamp hardware available directly from g.tec. This g.tec hardware can also be used from Simulink® using the Data Acquisition Toolbox to incorporate live data into your Simulink models.

With g.tec hardware support, you can perform the following tasks in MATLAB or Simulink:

  • Acquire data from all analog input channels
  • Control and generate data from analog output channels
  • Control the digital I/O channels
  • Configure the sampling rate of the DAQ hardware
  • Trigger the start of your data acquisition
  • Find and display the device settings

Platform and Release Support

Using MATLAB or Simulink with g.tec hardware requires installing the 32-bit version of MATLAB whether you are using a 32-bit or 64-bit Windows® machine. The 32-bit version of MATLAB can be installed on a 64-bit Windows operating system.