Display Measurements with Cockpit Instruments

You can view signal data using any of the Flight Instrument blocks. This example uses the HL-20 Lifting Body and Controller with Flight Instrumentation Blocks model. In this example, connect a gauge so that you can view the aircraft heading.

  1. To open the model, at the MATLAB command window, enter aeroblk_HL20_Gauges.

  2. Open the Visualization subsystem.

    There is an existing Airspeed Indicator block in the model.

  3. Add a second Airspeed Indicator block from the Flight Instruments library to the subsystem.

  4. Open the new Airspeed Indicator block.

  5. Select the Extract Flight Instruments block.

  6. In the new Airspeed Indicator block, observe that the block connection table is filled with signals from the Extract Flight Instruments block that you can observe.

  7. Select the option button next to Extract_Gauges:2 in the connection table.

  8. To connect the Extract_Gauges:2 signal to the Airspeed Indicator block, click OK.

  9. Simulate the model and observe the gauge as it registers the data.

  10. Close the model without saving it.

See Also

| | | | | | |

Related Topics

Was this topic helpful?