Note: This page has been translated by MathWorks. Please click here

To view all translated materals including this page, select Japan from the country navigator on the bottom of this page.

To view all translated materals including this page, select Japan from the country navigator on the bottom of this page.

Generate discrete wind turbulence with Dryden velocity spectra

Environment/Wind

The Dryden Wind Turbulence Model (Discrete) block uses the Dryden spectral representation to add turbulence to the aerospace model by using band-limited white noise with appropriate digital filter finite difference equations. This block implements the mathematical representation in the Military Specification MIL-F-8785C, Military Handbook MIL-HDBK-1797, and Military Handbook MIL-HDBK-1797B.

According to the military references, turbulence is a stochastic
process defined by velocity spectra. For an aircraft flying at a speed * V* through
a frozen turbulence field with a spatial frequency of Ω radians
per meter, the circular frequency ω is calculated by multiplying

$$$$

MIL-F-8785C | MIL-HDBK-1797 and MIL-HDBK-1797B | |
---|---|---|

Longitudinal | ||

$${\Phi}_{u}\left(\omega \right)$$ | $$\frac{2{\sigma}_{u}^{2}{L}_{u}}{\pi V}\cdot \frac{1}{1+{\left({L}_{u}\frac{\omega}{V}\right)}^{2}}$$ | $$\frac{2{\sigma}_{u}^{2}{L}_{u}}{\pi V}\cdot \frac{1}{1+{\left({L}_{u}\frac{\omega}{V}\right)}^{2}}$$ |

$${\Phi}_{p}(\omega )$$ | $$\frac{{\sigma}_{w}^{2}}{V{L}_{w}}\cdot \frac{0.8{\left(\frac{\pi {L}_{w}}{4b}\right)}^{\raisebox{1ex}{$1$}\!\left/ \!\raisebox{-1ex}{$3$}\right.}}{1+{\left(\frac{4b\omega}{\pi V}\right)}^{2}}$$ | $$\frac{{\sigma}_{w}^{2}}{2V{L}_{w}}\cdot \frac{0.8{\left(\frac{2\pi {L}_{w}}{4b}\right)}^{\raisebox{1ex}{$1$}\!\left/ \!\raisebox{-1ex}{$3$}\right.}}{1+{\left(\frac{4b\omega}{\pi V}\right)}^{2}}$$ |

Lateral | ||

$${\Phi}_{v}(\omega )$$ | $$\frac{{\sigma}_{v}^{2}{L}_{v}}{\pi V}\cdot \frac{1+3{\left({L}_{v}\frac{\omega}{V}\right)}^{2}}{{\left[1+{\left({L}_{v}\frac{\omega}{V}\right)}^{2}\right]}^{2}}$$ | $$\frac{2{\sigma}_{v}^{2}{L}_{v}}{\pi V}\cdot \frac{1+12{\left({L}_{v}\frac{\omega}{V}\right)}^{2}}{{\left[1+4{\left({L}_{v}\frac{\omega}{V}\right)}^{2}\right]}^{2}}$$ |

$${\Phi}_{r}(\omega )$$ | $$\frac{\mp {\left(\frac{\omega}{V}\right)}^{2}}{1+{\left(\frac{3b\omega}{\pi V}\right)}^{2}}\cdot {\Phi}_{v}\left(\omega \right)$$ | $$\frac{\mp {\left(\frac{\omega}{V}\right)}^{2}}{1+{\left(\frac{3b\omega}{\pi V}\right)}^{2}}\cdot {\Phi}_{v}\left(\omega \right)$$ |

Vertical | ||

$${\Phi}_{w}(\omega )$$ | $$\frac{{\sigma}_{w}^{2}{L}_{w}}{\pi V}\cdot \frac{1+3{\left({L}_{w}\frac{\omega}{V}\right)}^{2}}{{\left[1+{\left({L}_{w}\frac{\omega}{V}\right)}^{2}\right]}^{2}}$$ | $$\frac{2{\sigma}_{w}^{2}{L}_{w}}{\pi V}\cdot \frac{1+12{\left({L}_{w}\frac{\omega}{V}\right)}^{2}}{{\left[1+4{\left({L}_{w}\frac{\omega}{V}\right)}^{2}\right]}^{2}}$$ |

$${\Phi}_{q}(\omega )$$ | $$\frac{\pm {\left(\frac{\omega}{V}\right)}^{2}}{1+{\left(\frac{4b\omega}{\pi V}\right)}^{2}}\cdot {\Phi}_{w}\left(\omega \right)$$ | $$\frac{\pm {\left(\frac{\omega}{V}\right)}^{2}}{1+{\left(\frac{4b\omega}{\pi V}\right)}^{2}}\cdot {\Phi}_{w}\left(\omega \right)$$ |

The variable * b *represents the aircraft wingspan.
The variables

The spectral density definitions of turbulence angular rates are defined in the references as three variations, which are displayed in the following table:

$${p}_{g}=\frac{\partial {w}_{g}}{\partial y}$$ $${p}_{g}=\frac{\partial {w}_{g}}{\partial y}$$ $${p}_{g}=-\frac{\partial {w}_{g}}{\partial y}$$ | $${q}_{g}=\frac{\partial {w}_{g}}{\partial x}$$ $${q}_{g}=\frac{\partial {w}_{g}}{\partial x}$$ $${q}_{g}=-\frac{\partial {w}_{g}}{\partial x}$$ | $${r}_{g}=-\frac{\partial {v}_{g}}{\partial x}$$ $${r}_{g}=\frac{\partial {v}_{g}}{\partial x}$$ $${r}_{g}=\frac{\partial {v}_{g}}{\partial x}$$ |

The variations affect only the vertical (* q_{g}*)
and lateral (

Keep in mind that the longitudinal turbulence angular rate spectrum,
Φ*_{p}*(

The variations lead to the following combinations of vertical and lateral turbulence angular rate spectra:

Vertical | Lateral |
---|---|

Φ )ωΦ )ω−Φ )ω | −Φ )ωΦ )ωΦ )ω |

To generate a signal with the correct characteristics, a unit variance, band-limited white noise signal is used in the digital filter finite difference equations.

The following table displays the digital filter finite difference equations:

MIL-F-8785C | MIL-HDBK-1797 and MIL-HDBK-1797B | ||
---|---|---|---|

Longitudinal | |||

$${u}_{g}$$ | $$\left(1-\frac{V}{{L}_{u}}T\right){u}_{g}+\sqrt{2\frac{V}{{L}_{u}}T}\frac{{\sigma}_{u}}{{\sigma}_{\eta}}\eta {\text{\hspace{0.05em}}}_{1}$$ | $$\left(1-\frac{V}{{L}_{u}}T\right){u}_{g}+\sqrt{2\frac{V}{{L}_{u}}T}\frac{{\sigma}_{u}}{{\sigma}_{\eta}}\eta {\text{\hspace{0.05em}}}_{1}$$ | |

$${p}_{g}$$ | $$\begin{array}{l}\left(1-\frac{2.6}{\sqrt{{L}_{w}b}}T\right){p}_{g}+\\ \\ \sqrt{2\frac{2.6}{\sqrt{{L}_{w}b}}T}\frac{0.95}{\frac{\sqrt[3]{2{L}_{w}{b}^{2}}}{{\sigma}_{\eta}}{\eta}_{4}}{\sigma}_{w}\end{array}$$ | MIL-HDBK-1797 $$\begin{array}{l}\left(1-\frac{2.6}{\sqrt{2{L}_{w}b}}T\right){p}_{g}+\\ \\ \sqrt{2\frac{2.6}{\sqrt{2{L}_{w}b}}T}\frac{1.9}{\frac{\sqrt{2{L}_{w}b}}{{\sigma}_{\eta}}{\eta}_{4}}{\sigma}_{w}\end{array}$$ | |

MIL-HDBK-1797B $$\begin{array}{l}\left(1-\frac{2.6V}{\sqrt{2{L}_{w}b}}T\right){p}_{g}+\\ \\ \sqrt{2\frac{2.6V}{\sqrt{2{L}_{w}b}}T}\frac{1.9}{\frac{\sqrt{2{L}_{w}b}}{{\sigma}_{\eta}}{\eta}_{4}}{\sigma}_{w}\end{array}$$ | |||

Lateral | |||

$${v}_{g}$$ | $$\left(1-\frac{V}{{L}_{u}}T\right){v}_{g}+\sqrt{2\frac{V}{{L}_{u}}T}\frac{{\sigma}_{v}}{{\sigma}_{\eta}}\eta {\text{\hspace{0.05em}}}_{2}$$ | $$\left(1-\frac{V}{{L}_{u}}T\right){v}_{g}+\sqrt{2\frac{V}{{L}_{u}}T}\frac{{\sigma}_{v}}{{\sigma}_{\eta}}\eta {\text{\hspace{0.05em}}}_{2}$$ | |

$${r}_{g}$$ | $$\left(1-\frac{\pi V}{3b}T\right){r}_{g}\mp \frac{\pi}{3b}\left({v}_{g}-{v}_{g}{}_{{}_{past}}\right)$$ | $$\left(1-\frac{\pi V}{3b}T\right){r}_{g}\mp \frac{\pi}{3b}\left({v}_{g}-{v}_{g}{}_{{}_{past}}\right)$$ | |

Vertical | |||

$${w}_{g}$$ | $$\left(1-\frac{V}{{L}_{u}}T\right){w}_{g}+\sqrt{2\frac{V}{{L}_{u}}T}\frac{{\sigma}_{w}}{{\sigma}_{\eta}}\eta {\text{\hspace{0.05em}}}_{3}$$ | $$\left(1-\frac{V}{{L}_{u}}T\right){w}_{g}+\sqrt{2\frac{V}{{L}_{u}}T}\frac{{\sigma}_{w}}{{\sigma}_{\eta}}\eta {\text{\hspace{0.05em}}}_{3}$$ | |

$${q}_{g}$$ | $$\left(1-\frac{\pi V}{4b}T\right){q}_{g}\pm \frac{\pi}{4b}\left({w}_{g}-{w}_{g}{}_{{}_{past}}\right)$$ | $$\left(1-\frac{\pi V}{4b}T\right){q}_{g}\pm \frac{\pi}{4b}\left({w}_{g}-{w}_{g}{}_{{}_{past}}\right)$$ |

Divided into two distinct regions, the turbulence scale lengths and intensities are functions of altitude.

According to the military references, the turbulence scale lengths
at low altitudes, where * h* is the altitude in feet,
are represented in the following table:

MIL-F-8785C | MIL-HDBK-1797 and MIL-HDBK-1797B |
---|---|

$$\begin{array}{l}{L}_{w}=h\\ {L}_{u}={L}_{v}=\frac{h}{{\left(0.177+0.000823h\right)}^{1.2}}\end{array}$$ | $$\begin{array}{l}2{L}_{w}=h\\ {L}_{u}=2{L}_{v}=\frac{h}{{\left(0.177+0.000823h\right)}^{1.2}}\end{array}$$ |

The turbulence intensities are given below, where *W*_{20} is
the wind speed at 20 feet (6 m). Typically for light
turbulence, the wind speed at 20 feet is 15 knots; for moderate turbulence,
the wind speed is 30 knots, and for severe turbulence, the wind speed
is 45 knots.

$$\begin{array}{l}{\sigma}_{w}=0.1{W}_{20}\\ \frac{{\sigma}_{u}}{{\sigma}_{w}}=\frac{{\sigma}_{v}}{{\sigma}_{w}}=\frac{1}{{\left(0.177+0.000823h\right)}^{0.4}}\end{array}$$

The turbulence axes orientation in this region is defined as follows:

Longitudinal turbulence velocity,

, aligned along the horizontal relative mean wind vector*u*_{g}Vertical turbulence velocity,

, aligned with vertical.*w*_{g}

At this altitude range, the output of the block is transformed into body coordinates.

For medium to high altitudes the turbulence scale lengths and intensities are based on the assumption that the turbulence is isotropic. In the military references, the scale lengths are represented by the following equations:

MIL-F-8785C | MIL-HDBK-1797 and MIL-HDBK-1797B |
---|---|

= L_{u }=L_{v } =
1750 ft L_{w} | =
2L_{u }= 2L_{v } =
1750 ftL_{w} |

The turbulence intensities are determined from a lookup table
that provides the turbulence intensity as a function of altitude and
the probability of the turbulence intensity being exceeded. The relationship
of the turbulence intensities is represented in the following equation: * σ_{u}* =

The turbulence axes orientation in this region is defined as being aligned with the body coordinates.

At altitudes between 1000 feet and 2000 feet, the turbulence velocities and turbulence angular rates are determined by linearly interpolating between the value from the low altitude model at 1000 feet transformed from mean horizontal wind coordinates to body coordinates and the value from the high altitude model at 2000 feet in body coordinates.

**Units**Define the units of wind speed due to the turbulence.

Units

Wind Velocity

Altitude

Airspeed

`Metric (MKS)`

Meters/second

Meters

Meters/second

`English (Velocity in ft/s)`

Feet/second

Feet

Feet/second

`English (Velocity in kts)`

Knots

Feet

Knots

**Specification**Define which military reference to use. This affects the application of turbulence scale lengths in the lateral and vertical directions

**Model type**Select the wind turbulence model to use:

`Continuous Von Karman (+q -r)`

Use continuous representation of Von Kármán velocity spectra with positive vertical and negative lateral angular rates spectra.

`Continuous Von Karman (+q +r)`

Use continuous representation of Von Kármán velocity spectra with positive vertical and lateral angular rates spectra.

`Continuous Von Karman (-q +r)`

Use continuous representation of Von Kármán velocity spectra with negative vertical and positive lateral angular rates spectra.

`Continuous Dryden (+q -r)`

Use continuous representation of Dryden velocity spectra with positive vertical and negative lateral angular rates spectra.

`Continuous Dryden (+q +r)`

Use continuous representation of Dryden velocity spectra with positive vertical and lateral angular rates spectra.

`Continuous Dryden (-q +r)`

Use continuous representation of Dryden velocity spectra with negative vertical and positive lateral angular rates spectra.

`Discrete Dryden (+q -r)`

Use discrete representation of Dryden velocity spectra with positive vertical and negative lateral angular rates spectra.

`Discrete Dryden (+q +r)`

Use discrete representation of Dryden velocity spectra with positive vertical and lateral angular rates spectra.

`Discrete Dryden (-q +r)`

Use discrete representation of Dryden velocity spectra with negative vertical and positive lateral angular rates spectra.

The Discrete Dryden selections conform to the transfer function descriptions.

**Wind speed at 6 m defines the low altitude intensity**The measured wind speed at a height of 6 meters (20 feet) provides the intensity for the low-altitude turbulence model.

**Wind direction at 6 m (degrees clockwise from north)**The measured wind direction at a height of 6 meters (20 feet) is an angle to aid in transforming the low-altitude turbulence model into a body coordinates.

**Probability of exceedance of high-altitude intensity**Above 2000 feet, the turbulence intensity is determined from a lookup table that gives the turbulence intensity as a function of altitude and the probability of the turbulence intensity's being exceeded.

**Scale length at medium/high altitudes**The turbulence scale length above 2000 feet is assumed constant, and from the military references, a figure of 1750 feet is recommended for the longitudinal turbulence scale length of the Dryden spectra.

**Note**An alternate scale length value changes the power spectral density asymptote and gust load.**Wingspan**The wingspan is required in the calculation of the turbulence on the angular rates.

**Band-limited noise and discrete filter sample time (sec)**The sample time at which the unit variance white noise signal is generated and at which the discrete filters are updated.

**Noise seeds**There are four random numbers required to generate the turbulence signals, one for each of the three velocity components and one for the roll rate. The turbulences on the pitch and yaw angular rates are based on further shaping of the outputs from the shaping filters for the vertical and lateral velocities.

**Turbulence on**Selecting the check box generates the turbulence signals.

Input | Dimension Type | Description |
---|---|---|

First | scalar | Contains the altitude, in units selected. |

Second | scalar | Contains the aircraft speed, in units selected. |

Third | 3-by-3 matrix | Contains the NED direction cosine matrix. |

Output | Dimension Type | Description |
---|---|---|

First | Three-element signal | Contains the turbulence velocities, in the selected units. |

Second | Three-element signal | Contains the turbulence angular rates, in radians per second. |

The "frozen turbulence field" assumption is valid for the cases of mean-wind velocity and the root-mean-square turbulence velocity, or intensity, is small relative to the aircraft's ground speed.

The turbulence model describes an average of all conditions for clear air turbulence because the following factors are not incorporated into the model:

Terrain roughness

Lapse rate

Wind shears

Mean wind magnitude

Other meteorological factions (except altitude)

U.S. Military Handbook MIL-HDBK-1797B, 9 April 2012.

U.S. Military Handbook MIL-HDBK-1797, 19 December 1997.

U.S. Military Specification MIL-F-8785C, 5 November 1980.

Chalk, C., Neal, P., Harris, T., Pritchard, F., Woodcock, R., "Background Information and User Guide for MIL-F-8785B(ASG), `Military Specification-Flying Qualities of Piloted Airplanes'," AD869856, Cornell Aeronautical Laboratory, August 1969.

Hoblit, F., *Gust Loads on Aircraft: Concepts and
Applications*, AIAA Education Series, 1988.

Ly, U., Chan, Y., "Time-Domain Computation of Aircraft Gust Covariance Matrices," AIAA Paper 80-1615, Atmospheric Flight Mechanics Conference, Danvers, Massachusetts, August 11-13, 1980.

McRuer, D., Ashkenas, I., Graham, D., *Aircraft Dynamics
and Automatic Control*, Princeton University Press, July
1990.

Moorhouse, D., Woodcock, R., "Background Information and User Guide for MIL-F-8785C, `Military Specification-Flying Qualities of Piloted Airplanes'," ADA119421, Flight Dynamic Laboratory, July 1982.

McFarland, R., "A Standard Kinematic Model for Flight Simulation at NASA-Ames," NASA CR-2497, Computer Sciences Corporation, January 1975.

Tatom, F., Smith, R., Fichtl, G., "Simulation of Atmospheric Turbulent Gusts and Gust Gradients," AIAA Paper 81-0300, Aerospace Sciences Meeting, St. Louis, Missouri, January 12-15, 1981.

Yeager, J., "Implementation and Testing of Turbulence Models for the F18-HARV Simulation," NASA CR-1998-206937, Lockheed Martin Engineering & Sciences, March 1998.

Was this topic helpful?