Documentation

This is machine translation

Translated by Microsoft
Mouseover text to see original. Click the button below to return to the English version of the page.

Note: This page has been translated by MathWorks. Click here to see
To view all translated materials including this page, select Country from the country navigator on the bottom of this page.

Guidance, Navigation, and Control (GNC)

Model guidance, navigation, and control (GNC) systems, including controllers

Use guidance blocks to calculate distance between two vehicles, controller blocks to control the movement of vehicles, such as the vehicle path, location, and velocity, and the forces on the vehicle. Use navigation blocks to model accelerometers, gyroscopes, and inertial measurement units (IMU) on each of three axes; an IMU that contains one three-axis accelerometer and one three-axis gyroscope. Implement pilot crossover, precision, and Tustin models.

  • Guidance
    Calculate range between two vehicles
  • Navigation
    Implement three-axis measurement of accelerations, angular rates, inertias
  • Control
    Simulate various controllers, such as one-dimensional, two-dimensional, three-dimensional types
  • Actuators
    Represent linear and nonlinear actuators with saturation and rate limits
  • Pilot Models
    Implement pilot models
  • Flight Parameters
    Calculate aerospace parameters such as ideal airspeed correction, Mach number, dynamic pressure

Featured Examples

Was this topic helpful?