Transmit net_fdm packet to destination IP address and port for FlightGear session
The Send net_fdm Packet to FlightGear block transmits the net_fdm packet to FlightGear on the current computer, or a remote computer on the network. The packet is constructed using the Pack net_fdm Packet for FlightGear block. The destination port should be an unused port that you can use when you launch FlightGear with the FlightGear command line flag:
The second port in the list, 5502, is the network flight dynamics model (fdm) port.
This block does not produce deployable code.
You can use one of several techniques to determine the destination IP address, such as:
Use 127.0.0.1 for "this" computer
Ping another computer from a Windows® cmd.exe (or UNIX® shell) prompt:
C:\> ping andyspc Pinging andyspc [126.96.36.199] with 32 bytes of data: Reply from 188.8.131.52: bytes=32 time=30ms TTL=253 Reply from 184.108.40.206: bytes=32 time=20ms TTL=253 Reply from 220.127.116.11: bytes=32 time=20ms TTL=253 Reply from 18.104.22.168: bytes=32 time=20ms TTL=253 Ping statistics for 22.214.171.124: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 20ms, Maximum = 30ms, Average = 22ms
On a Windows machine, type ipconfig and use the returned IP Address:
H:\>ipconfig Windows IP Configuration Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : IP Address. . . . . . . . . . . . : 192.168.42.178 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 192.168.42.254