This is machine translation

Translated by Microsoft
Mouseover text to see original. Click the button below to return to the English version of the page.

Note: This page has been translated by MathWorks. Click here to see
To view all translated materials including this page, select Country from the country navigator on the bottom of this page.

Create a Flight Animation from Trajectory Data

This example shows how to create a flight animation for a trajectory using a FlightGear Animation object.

Note: When running this example within the product, you must customize the example with your FlightGear installation and uncomment the GenerateRunScript, system and play commands. You must also copy the $MATLAB/toolbox/aero/astdemos/HL20 folder into the $FLIGHTGEAR/data/Aircraft/ folder.

Load Recorded Flight Trajectory Data

The flight trajectory data for this example is stored in a comma separated value formatted file. Use dlmread to read the data from the file starting at row 1 and column 0 skipping the header information.

tdata = dlmread('asthl20log.csv',',',1,0);

Create a Time Series Object from Trajectory Data

Use the MATLAB® timeseries command to create the time series object, ts, from the latitude, longitude, altitude, and Euler angle data along with the time array in tdata. To convert the latitude, longitude, and Euler angles from degrees to radians use the convang function.

ts = timeseries([convang(tdata(:,[3 2]),'deg','rad') ...
                 tdata(:,4) convang(tdata(:,5:7),'deg','rad')],tdata(:,1));

You can create imported data from this data using other valid formats, such as 'Array6DoF', For example:

ts = [tdata(:,1) convang(tdata(:,[3 2]),'deg','rad') tdata(:,4) ... convang(tdata(:,5:7),'deg','rad')];

and 'Array3DoF'.

ts = [tdata(:,1) convang(tdata(:,3),'deg','rad') tdata(:,4) ... convang(tdata(:,6),'deg','rad')];

Use FlightGearAnimation Object to Initialize Flight Animation

Open a FlightGearAnimation object.

h = Aero.FlightGearAnimation;

Set FlightGearAnimation object properties for timeseries.

h.TimeseriesSourceType = 'Timeseries';
h.TimeseriesSource = ts;

Set FlightGearAnimation object properties about FlightGear

These properties include the path to the installation folder, the version number, the aircraft geometry model, and the network information for FlightGear flight simulator.

h.FlightGearBaseDirectory = 'C:\Program Files\FlightGear';
h.FlightGearVersion = '2017.3';
h.GeometryModelName = 'HL20';
h.DestinationIpAddress = '';
h.DestinationPort = '5502';

Set the desired initial conditions (location and orientation) for FlightGear flight simulator.

h.AirportId = 'KSFO';
h.RunwayId = '10L';
h.InitialAltitude = 7224;
h.InitialHeading = 113;
h.OffsetDistance = 4.72;
h.OffsetAzimuth = 0;

Enable "just in time" scenery installation for FlightGear flight simulator. Required scenery will be downloaded while the simulator is running.

h.InstallScenery = true;

Disable FlightGear Shaders.

h.DisableShaders = true;

Set the seconds of animation data per second of wall-clock time.

h.TimeScaling = 5;

Use get(h) to check the FlightGearAnimation object properties and their values.

           TimeseriesSource: [1x1 timeseries]
       TimeseriesSourceType: 'Timeseries'
          TimeseriesReadFcn: @TimeseriesRead
                TimeScaling: 5
            FramesPerSecond: 12
          FlightGearVersion: '2017.3'
             OutputFileName: 'runfg.bat'
    FlightGearBaseDirectory: 'C:\Program Files\FlightGear'
          GeometryModelName: 'HL20'
       DestinationIpAddress: ''
            DestinationPort: '5502'
                  AirportId: 'KSFO'
                   RunwayId: '10L'
            InitialAltitude: 7224
             InitialHeading: 113
             OffsetDistance: 4.7200
              OffsetAzimuth: 0
             InstallScenery: 1
             DisableShaders: 1
                     TStart: NaN
                     TFinal: NaN
               Architecture: 'Default'

Create a Run Script to Launch FlightGear Flight Simulator

To start FlightGear with the desired initial conditions (location, date, time, weather, and operating modes), create a run script with the GenerateRunScript command. By default, GenerateRunScript saves the run script as a text file named 'runfg.bat'.


You do not need to generate this file each time the data is viewed. Generate it only when the desired initial conditions or FlightGear information changes.

Start FlightGear Flight Simulator

To start FlightGear from the MATLAB command prompt, type the system command to execute the run script created by GenerateRunScript.

system('runfg.bat &');

Tip: With the FlightGear window in focus, press the V key to alternate between the different aircraft views: cockpit view, helicopter view, and chase view.

Play the Flight Animation of Trajectory Data

Once FlightGear is up and running, the FlightGearAnimation object can start to communicate with FlightGear. To display the flight animation with FlightGear, use the play command.


To display a screenshot of the flight animation, use the MATLAB image command.

image(imread([matlabroot filesep fullfile('toolbox','aero','astdemos','figures','astfganim01.png')],'png'));
axis off;
set(gca,'Position',[ 0 0 1 1 ]);

Was this topic helpful?