Documentation

This is machine translation

Translated by Microsoft
Mouseover text to see original. Click the button below to return to the English verison of the page.

Note: This page has been translated by MathWorks. Please click here
To view all translated materals including this page, select Japan from the country navigator on the bottom of this page.

Configure the Simulink Environment for Communications Models

About the Communications System Toolbox Simulink Model Template

The Communications System Toolbox™ Simulink® model template lets you automatically configure the Simulink environment with the recommended settings for communications modeling. Communications System Toolbox Simulink model templates enable reuse of settings, including configuration parameters. The model you create from the template uses best practices and takes advantage of previous solutions to common problems which helps you get started more quickly.

For more information on Simulink model templates, see Create a Model (Simulink).

Create Model Using the Communications System Toolbox Simulink Model Template

To create a new blank model and open the library browser:

  1. On the MATLAB® Home tab, click Simulink, and choose the Communications System model template.

  2. Click Create Model to create an empty model with settings suitable for use with Communications System Toolbox. The new model opens. To access the library browser, click the Library Browser button on the model toolbar.

The new model using the template settings and contents appears in the Simulink Editor. The model is only in memory until you save it.

The Communications System Toolbox Simulink Model Template

When you create a model by choosing the Communications System Toolbox Simulink model template, the model is configured to use the settings recommended for communications modeling. Some of these settings are:

Configuration ParameterSetting
'SingleTaskRateTransMsg''error'
'Solver''VariableStepDiscrete'
'EnableMultiTasking''Off'
'MaxStep''auto'
'StartTime''0.0'
'StopTime''inf'
'FixedStep''auto'
'SaveTime''off'
'SaveOutput''off'
'AlgebraicLoopMsg''error'
'RTWInlineParameters''on'
'BooleanDataType''off'
'UnnecessaryDatatypeConvMsg''none'
'LocalBlockOutputs''off'

Was this topic helpful?