Documentation

This is machine translation

Translated by Microsoft
Mouse over text to see original. Click the button below to return to the English verison of the page.

comm.DPSKDemodulator System object

Package: comm

Demodulate using M-ary DPSK method

Description

The DPSKDemodulator object demodulates a signal that was modulated using the M-ary differential phase shift keying method. The input is a baseband representation of the modulated signal. The input and output for this object are discrete-time signals. This object accepts a scalar-valued or column vector input signal.

To demodulate a signal that was modulated using differential phase shift keying:

  1. Define and set up your DPSK modulator object. See Construction.

  2. Call step to demodulate a signal according to the properties of DPSKDemodulator. The behavior of step is specific to each object in the toolbox.

    Note:   Starting in R2016b, instead of using the step method to perform the operation defined by the System object™, you can call the object with arguments, as if it were a function. For example, y = step(obj,x) and y = obj(x) perform equivalent operations.

Construction

H = comm.DPSKDemodulator creates a demodulator System object, H. This object demodulates the input signal using the M-ary differential phase shift keying (M-DPSK) method.

H = comm.DPSKDemodulator(Name,Value) creates an M-DPSK demodulator object, H, with each specified property set to the specified value. You can specify additional name-value pair arguments in any order as (Name1,Value1,...,NameN,ValueN).

H = comm.DPSKDemodulator(M,PHASE,Name,Value) creates an M-DPSK demodulator object, H. This object has the ModulationOrder property set to M, the PhaseRotation property set to PHASE, and the other specified properties set to the specified values.

Properties

ModulationOrder

Number of points in signal constellation

Specify the number of points in the signal constellation as a positive, integer scalar value. The default is 8.

PhaseRotation

Additional phase shift

Specify the additional phase difference between previous and current modulated symbols in radians as a real scalar value. The default is pi/8. This value corresponds to the phase difference between previous and current modulated symbols when the input is zero.

BitOutput

Output data as bits

Specify whether the output consists of groups of bits or integer symbol values. The default is false. When you set this property to true the step method outputs a column vector of bit values. The length of this column vector is equal to log2(ModulationOrder) times the number of demodulated symbols.

When you set this property to false, the step method outputs a column vector. The length of this column vector is equal to that of the input data vector. The output contains integer symbol values between 0 and ModulationOrder-1.

SymbolMapping

Constellation encoding

Specify how the object maps an integer or group of log2(ModulationOrder) bits to the corresponding symbol as one of Binary | Gray. The default is Gray. When you set this property to Gray, the object uses a Gray-encoded signal constellation. When you set this property to Binary, the input integer m, between (0m ModulationOrder–1) maps to the current symbol. This mapping uses exp(j×PhaseRotation + j×2×π×m/ModulationOrder)×(previously modulated symbol).

OutputDataType

Data type of output

Specify the output data type as one of Full precision | Smallest unsigned integer | double | single | int8 | uint8 | int16 | uint16 | int32 | uint32. The default is Full precision. When you set this property to Full precision, the input data type is single or double precision, the output data is the same as that of the input. When you set the BitOutput property to true, logical data type becomes a valid option.

Methods

cloneCreate M-DPSK demodulator object with same property values
getNumInputsNumber of expected inputs to step method
getNumOutputsNumber of outputs from step method
isLockedLocked status for input attributes and nontunable properties
releaseAllow property value and input characteristics changes
resetReset states of M-DPSK demodulator object
stepDemodulate using M-ary DPSK method

Examples

expand all

Create a DPSK modulator and demodulator pair. Create an AWGN channel object having three bits per symbol.

dpskmod = comm.DPSKModulator(8,pi/8,'BitInput',true);
dpskdemod = comm.DPSKDemodulator(8,pi/8,'BitOutput',true);
channel = comm.AWGNChannel('EbNo',10,'BitsPerSymbol',3);

Create an error rate calculator. Set the ComputationDelay property to 1 to account for the one bit transient caused by the differential modulation

errorRate = comm.ErrorRate('ComputationDelay',1);

Main processing loop steps:

  • Generate 50 3-bit frames

  • 8-DPSK modulate

  • Pass through AWGN channel

  • 8-DPSK demodulate

  • Collect error statistics

for counter = 1:100
    txData = randi([0 1],150,1);
    modSig = dpskmod(txData);
    rxSig = channel(modSig);
    rxData = dpskdemod(rxSig);
    errorStats = errorRate(txData,rxData);
end

Display the error statistics.

ber = errorStats(1)
numErrors = errorStats(2)
numBits = errorStats(3)
ber =

    0.0098


numErrors =

   147


numBits =

       14999

Algorithms

This object implements the algorithm, inputs, and outputs described on the M-DPSK Demodulator Baseband block reference page. The object properties correspond to the block parameters.

Introduced in R2012a

Was this topic helpful?