Convert shift to mask vector for shift register configuration
mask = shift2mask(prpoly,shift)
mask = shift2mask(prpoly,shift) returns
the mask that is equivalent to the shift (or offset) specified by
for a linear feedback shift register whose connections are specified
by the primitive polynomial
can have one of these formats:
A binary vector that lists the coefficients of the primitive polynomial in order of descending powers
An integer scalar whose binary representation gives the coefficients of the primitive polynomial, where the least significant bit is the constant term
shift input is an integer scalar.
The equivalent mask for the shift s is the remainder after dividing
the polynomial xs by the primitive polynomial.
mask represents the remainder polynomial
by listing the coefficients in order of descending powers.
Linear feedback shift registers are part of an implementation of a pseudonoise sequence generator. Below is a schematic diagram of a pseudonoise sequence generator. All adders perform addition modulo 2.
The primitive polynomial determines the state of each switch labeled gk, and the mask determines the state of each switch labeled mk. The lower half of the diagram shows the implementation of the shift, which delays the starting point of the output sequence. If the shift is zero, the m0 switch is closed while all other mk switches are open. The table below indicates how the shift affects the shift register's output.
|T = 0||T = 1||T = 2||...||T = s||T = s+1|
|Shift = 0||x0||x1||x2||...||xs||xs+1|
|Shift = s > 0||xs||xs+1||xs+2||...||x2s||x2s+1|
If you have Communications System Toolbox™ software and want to generate a pseudonoise sequence in a Simulink® model, see the PN Sequence Generator block reference page.
Convert a shift in a linear feedback shift register into an equivalent mask.
Convert a shift of 5 into the equivalent mask for the linear feedback shift register whose connections are specified by the primitive polynomial . The length of the mask is equal to the degree of the primitive polynomial, 4.
mk = shift2mask([1 1 0 0 1],5)
mk = 1 0 1 1
Convert a shift of 7 to a mask of for the prmitive polynomial .
mk2 = shift2mask('x5+x2+1',7)
mk2 = 1 0 1 0 0
 Lee, J. S., and L. E. Miller, CDMA Systems Engineering Handbook, Boston, Artech House, 1998.
 Simon, Marvin K., Jim K. Omura, et al., Spread Spectrum Communications Handbook, New York, McGraw-Hill, 1994.