This is machine translation

Translated by Microsoft
Mouseover text to see original. Click the button below to return to the English verison of the page.

Note: This page has been translated by MathWorks. Please click here
To view all translated materals including this page, select Japan from the country navigator on the bottom of this page.

Control System Designer

Design single-input, single-output (SISO) controllers


The Control System Designer app lets you design single-input, single-output (SISO) controllers for feedback systems modeled in MATLAB® or Simulink® (requires Simulink Control Design™ software).

Using this app, you can:

  • Design controllers using:

    • Interactive Bode, root locus, and Nichols graphical editors for adding, modifying, and removing controller poles, zeros, and gains.

    • Automated PID, LQG, or IMC tuning.

    • Optimization-based tuning (requires Simulink Design Optimization™ software).

    • Automated loop shaping (requires Robust Control Toolbox™ software).

  • Tune compensators for single-loop or multiloop control architectures.

  • Analyze control system designs using time-domain and frequency-domain responses, such as step responses and pole-zero maps.

  • Compare response plots for multiple control system designs.

  • Design controllers for multimodel control applications.

Open the Control System Designer App

  • MATLAB Toolstrip: On the Apps tab, under Control System Design and Analysis, click the app icon.

  • MATLAB command prompt: Enter controlSystemDesigner.

  • Simulink model editor: Select Analysis > Control Design > Control System Designer.

Programmatic Use

expand all

controlSystemDesigner opens the Control System Designer app using the following default control architecture:

The architecture consists of the LTI objects:

By default, the app configures each of these models as a unit gain.

controlSystemDesigner(plant) initializes the plant, G, to plant. plant can be any SISO LTI model created with ss, tf, zpk or frd, or an array of such models.

controlSystemDesigner(plant,comp) initializes the compensator, C, to the SISO LTI model comp.

controlSystemDesigner(plant,comp,sensor) initializes the sensor model, H, to sensor. sensor can be any SISO LTI model or an array of such models. If you specify both plant and sensor as LTI model arrays, the lengths of the arrays must match.

controlSystemDesigner(plant,comp,sensor,prefilt) initializes the prefilter model, F, to the SISO LTI model prefilt.

controlSystemDesigner(views) opens the app and specifies the initial graphical editor configuration. views can be any of the following character vectors, or a cell array of multiple character vectors.

In addition to opening the specified graphical editors, the app plots the closed-loop, input-output step response.

controlSystemDesigner(views,plant,comp,sensor,prefilt) specifies the initial plot configuration and initializes the plant, compensator, sensor, and prefilter using the specified models. If a model is omitted, the app uses the default value.

controlSystemDesigner(initData) opens the app and initializes the system configuration using the initialization data structure initdata. To create initdata, use sisoinit.

controlSystemDesigner(sessionFile) opens the app and loads a previously saved session. sessionFile is the name of a session data file on the MATLAB path. This data includes the current system architecture and plot configuration, and any designs and responses saved in the Data Browser.

To save a session, in the Control System Designer app, on the Control System tab, click Save Session.

See Also



Introduced in R2015a