Documentation

This is machine translation

Translated by
Mouseover text to see original. Click the button below to return to the English verison of the page.

Note: This page has been translated by MathWorks. Please click here
To view all translated materals including this page, select Japan from the country navigator on the bottom of this page.

Numeric Model of SISO Feedback Loop

This example shows how to interconnect numeric LTI models representing multiple system components to build a single numeric model of a closed-loop system, using model arithmetic and interconnection commands.

Construct a model of the following single-loop control system.

The feedback loop includes a plant G(s), a controller C(s), and a representation of sensor dynamics, S(s). The system also includes a prefilter F(s).

1. Create model objects representing each of the components.

```G = zpk([],[-1,-1],1); C = pid(2,1.3,0.3,0.5); S = tf(5,[1 4]); F = tf(1,[1 1]);```

The plant G is a zero-pole-gain (`zpk`) model with a double pole at s = –1. Model object C is a PID controller. The models F and S are transfer functions.

2. Connect the controller and plant models.

`H = G*C;`

To combine models using the multiplication operator `*`, enter the models in reverse order compared to the block diagram.

 Tip:   Alternatively, construct H(s) using the `series` command: `H = series(C,G);`
3. Construct the unfiltered closed-loop response $T\left(s\right)=\frac{H}{1+HS}$.

`T = feedback(H,S);`
 Caution:   Do not use model arithmetic to construct `T` algebraically:`T = H/(1+H*S)`This computation duplicates the poles of `H`, which inflates the model order and might lead to computational inaccuracy.
4. Construct the entire closed-loop system response from r to y.

`T_ry = T*F;`

`T_ry` is a Numeric LTI Model representing the aggregate closed-loop system. `T_ry` does not keep track of the coefficients of the components `G`, `C`, `F`, and `S`.

You can operate on `T_ry` with any Control System Toolbox™ control design or analysis commands.

More About

Was this topic helpful?

Learn how to automatically tune PID controller gains

Download code examples