Pole-zero simplification reduces the order of your model exactly by canceling pole-zero pairs or eliminating states that have no effect on the overall model response. Pole-zero pairs can be introduced, for example, when you construct closed-loop architectures. Normal small errors associated with numerical computation can convert such canceling pairs to near-canceling pairs. Removing these states preserves the model response characteristics while simplifying analysis and control design. Types of pole-zero simplification include:
Structural elimination — Eliminate states that are structurally
disconnected from the inputs or outputs. Eliminating structurally disconnected
states is a good first step in model reduction because the process does not
involve any numerical computation. It also preserves the state structure of the
remaining states. At the command line, perform structural elimination with
Pole-zero cancelation or minimal realization — Eliminate canceling or
near-canceling pole-zero pairs from transfer functions. Eliminate unobservable
or uncontrollable states from state-space models. At the command line, perform
this kind of simplification with
In the Model Reducer app, the Pole-Zero Simplification method automatically eliminates structurally disconnected states and also performs pole-zero cancelation or minimal realization.
Model Reducer provides an interactive tool for performing model reduction and examining and comparing the responses of the original and reduced-order models. To reduce a model by pole-zero simplification in Model Reducer:
Open the app and import a model to reduce. For instance, suppose that
there is a model named
build in the MATLAB® workspace. The following command opens Model
Reducer and imports the LTI model
In the Data Browser, select the model to reduce. Click Pole-Zero Simplification.
In the Pole-Zero Simplification tab, Model Reducer displays a plot of the frequency response of the original model and a reduced version of the model. The app also displays a pole-zero map of both models.
The pole-zero map marks pole locations with
x and zero
The frequency response is a Bode plot for SISO models, and a singular-value plot for MIMO models.
Optionally, change the tolerance with which Model Reducer
identifies canceling pole-zero pairs. Model Reducer cancels
pole-zero pairs that fall within the tolerance specified by the
Simplification of pole/zero pairs value. In this
case, no pole-zero pairs are close enough together for Model
Reducer to cancel them at the default tolerance of
1e-05. To cancel pairs that are a little further
apart, move the slider to the right or enter a larger value in the text
o marks on the
pole-zero map show the near-canceling pole-zero pairs in the original model
that are eliminated from the simplified model. Poles and zeros remaining in
the simplified model are marked with red
Try different simplification tolerances while observing the frequency response of the original and simplified model. Remove as many poles and zeros as you can while preserving the system behavior in the frequency region that is important for your application. Optionally, examine absolute or relative error between the original and simplified model. Select the error-plot type using the buttons on the Pole-Zero Simplification tab.
For more information about using the analysis plots, see Visualize Reduced-Order Models in the Model Reducer App.
When you have a simplified model that you want to store and analyze further, click . The new model appears in the Data Browser with a name that reflects the reduced model order.
After creating a reduced model in the Data Browser, you can continue changing the simplification parameters and create reduced models with different orders for analysis and comparison.
You can now perform further analysis with the reduced model. For example:
Examine other responses of the reduced system, such as the step response or Nichols plot. To do so, use the tools on the Plots tab. See Visualize Reduced-Order Models in the Model Reducer App for more information.
Export reduced models to the MATLAB workspace for further analysis or control design. On the Model Reducer tab, click Export.
To create a MATLAB script you can use for further model-reduction tasks at the command line, click Create Reduced Model, and select Generate MATLAB Script.
Model Reducer creates a script that uses the
minreal command to perform
model reduction with the parameters you have set on the Pole-Zero
Simplification tab. The script opens in the MATLAB editor.
To reduce the order of a model by pole-zero cancelation at the command line, use
Create a model of the following system, where
C is a PI controller, and
G has a zero at rad/s. Such a low-frequency zero can arise from derivative action somewhere in the plant dynamics. For example, the plant may include a component that computes speed from position measurements.
G = zpk(3e-8,[-1,-3],1); C = pid(1,0.3); T = feedback(G*C,1)
T = (s+0.3) (s-3e-08) ---------------------- s (s+4.218) (s+0.7824) Continuous-time zero/pole/gain model.
In the closed-loop model
T, the integrator from
C very nearly cancels the low-frequency zero of
Force a cancelation of the integrator with the zero near the origin.
Tred = minreal(T,1e-7)
Tred = (s+0.3) -------------------- (s+4.218) (s+0.7824) Continuous-time zero/pole/gain model.
minreal reduces transfer function order by canceling exact pole-zero pairs or near pole-zero pairs within
1e-7 as the second input causes
minreal to eliminate pole-zero pairs within rad/s of each other.
The reduced model
Tred includes all the dynamics of the original closed-loop model
T, except for the near-canceling zero-pole pair.
Compare the frequency responses of the original and reduced systems.
Because the canceled pole and zero do not match exactly, some extreme low-frequency dynamics evident in the original model are missing from
Tred. In many applications, you can neglect such extreme low-frequency dynamics. When you increase the matching tolerance of
minreal, make sure that you do not eliminate dynamic features that are relevant to your application.