Note: This page has been translated by MathWorks. Please click here

To view all translated materals including this page, select Japan from the country navigator on the bottom of this page.

To view all translated materals including this page, select Japan from the country navigator on the bottom of this page.

**MathWorks Machine Translation**

The automated translation of this page is provided by a general purpose third party translator tool.

MathWorks does not warrant, and disclaims all liability for, the accuracy, suitability, or fitness for purpose of the translation.

Fit curve or surface to data

`fitobject = fit(x,y,fitType)`

`fitobject = fit([x,y],z,fitType)`

`fitobject = fit(x,y,fitType,fitOptions)`

`fitobject = fit(x,y,fitType,Name,Value)`

```
[fitobject,gof]
= fit(x,y,fitType)
```

```
[fitobject,gof,output]
= fit(x,y,fitType)
```

creates
a fit to the data using the algorithm options specified by the `fitobject`

= fit(`x`

,`y`

,`fitType`

,`fitOptions`

)`fitOptions`

object.

creates
a fit to the data using the library model `fitobject`

= fit(`x`

,`y`

,`fitType`

,`Name,Value`

)`fitType`

with
additional options specified by one or more `Name,Value`

pair
arguments. Use `fitoptions`

to
display available property names and default values for the specific
library model.

Load some data, fit a quadratic curve to variables `cdate`

and `pop`

, and plot the fit and data.

load census; f=fit(cdate,pop,'poly2')

f = Linear model Poly2: f(x) = p1*x^2 + p2*x + p3 Coefficients (with 95% confidence bounds): p1 = 0.006541 (0.006124, 0.006958) p2 = -23.51 (-25.09, -21.93) p3 = 2.113e+04 (1.964e+04, 2.262e+04)

plot(f,cdate,pop)

For a list of library model names, see `fitType`

.

Load some data and fit a polynomial surface of degree 2 in `x`

and degree 3 in `y`

. Plot the fit and data.

load franke sf = fit([x, y],z,'poly23')

Linear model Poly23: sf(x,y) = p00 + p10*x + p01*y + p20*x^2 + p11*x*y + p02*y^2 + p21*x^2*y + p12*x*y^2 + p03*y^3 Coefficients (with 95% confidence bounds): p00 = 1.118 (0.9149, 1.321) p10 = -0.0002941 (-0.000502, -8.623e-05) p01 = 1.533 (0.7032, 2.364) p20 = -1.966e-08 (-7.084e-08, 3.152e-08) p11 = 0.0003427 (-0.0001009, 0.0007863) p02 = -6.951 (-8.421, -5.481) p21 = 9.563e-08 (6.276e-09, 1.85e-07) p12 = -0.0004401 (-0.0007082, -0.0001721) p03 = 4.999 (4.082, 5.917)

plot(sf,[x,y],z)

Load the `franke`

data and convert it to a MATLAB® table.

```
load franke
T = table(x,y,z);
```

Specify the variables in the table as inputs to the `fit`

function, and plot the fit.

```
f = fit([T.x, T.y],T.z,'linearinterp');
plot( f, [T.x, T.y], T.z )
```

Load and plot the data, create fit options and fit type using the `fittype`

and `fitoptions`

functions, then create and plot the fit.

Load and plot the data in `census.mat`

.

load census plot(cdate,pop,'o')

Create a fit options object and a fit type for the custom nonlinear model , where *a* and *b* are coefficients and *n* is a problem-dependent parameter.

fo = fitoptions('Method','NonlinearLeastSquares',... 'Lower',[0,0],... 'Upper',[Inf,max(cdate)],... 'StartPoint',[1 1]); ft = fittype('a*(x-b)^n','problem','n','options',fo);

Fit the data using the fit options and a value of *n* = 2.

```
[curve2,gof2] = fit(cdate,pop,ft,'problem',2)
```

curve2 = General model: curve2(x) = a*(x-b)^n Coefficients (with 95% confidence bounds): a = 0.006092 (0.005743, 0.006441) b = 1789 (1784, 1793) Problem parameters: n = 2 gof2 = struct with fields: sse: 246.1543 rsquare: 0.9980 dfe: 19 adjrsquare: 0.9979 rmse: 3.5994

Fit the data using the fit options and a value of *n* = 3.

```
[curve3,gof3] = fit(cdate,pop,ft,'problem',3)
```

curve3 = General model: curve3(x) = a*(x-b)^n Coefficients (with 95% confidence bounds): a = 1.359e-05 (1.245e-05, 1.474e-05) b = 1725 (1718, 1731) Problem parameters: n = 3 gof3 = struct with fields: sse: 232.0058 rsquare: 0.9981 dfe: 19 adjrsquare: 0.9980 rmse: 3.4944

Plot the fit results with the data.

hold on plot(curve2,'m') plot(curve3,'c') legend('Data','n=2','n=3') hold off

Load some data and fit and plot a cubic polynomial with center and scale (`Normalize`

) and robust fitting options.

load census; f=fit(cdate,pop,'poly3','Normalize','on','Robust','Bisquare')

f = Linear model Poly3: f(x) = p1*x^3 + p2*x^2 + p3*x + p4 where x is normalized by mean 1890 and std 62.05 Coefficients (with 95% confidence bounds): p1 = -0.4619 (-1.895, 0.9707) p2 = 25.01 (23.79, 26.22) p3 = 77.03 (74.37, 79.7) p4 = 62.81 (61.26, 64.37)

plot(f,cdate,pop)

Define a function in a file and use it to create a fit type and fit a curve.

Define a function in a MATLAB^{®} file.

function y = piecewiseLine(x,a,b,c,d,k) % PIECEWISELINE A line made of two pieces % that is not continuous. y = zeros(size(x)); % This example includes a for-loop and if statement % purely for example purposes. for i = 1:length(x) if x(i) < k, y(i) = a + b.* x(i); else y(i) = c + d.* x(i); end end end

Save the file.

Define some data, create a fit type specifying the function `piecewiseLine`

,
create a fit using the fit type `ft`

, and plot the
results.

x = [0.81;0.91;0.13;0.91;0.63;0.098;0.28;0.55;... 0.96;0.96;0.16;0.97;0.96]; y = [0.17;0.12;0.16;0.0035;0.37;0.082;0.34;0.56;... 0.15;-0.046;0.17;-0.091;-0.071]; ft = fittype( 'piecewiseLine( x, a, b, c, d, k )' ) f = fit( x, y, ft, 'StartPoint', [1, 0, 1, 0, 0.5] ) plot( f, x, y )

Load some data and fit a custom equation specifying points to exclude. Plot the results.

Load data and define a custom equation and some start points.

```
[x, y] = titanium;
gaussEqn = 'a*exp(-((x-b)/c)^2)+d'
```

gaussEqn = 'a*exp(-((x-b)/c)^2)+d'

startPoints = [1.5 900 10 0.6]

```
startPoints =
1.5000 900.0000 10.0000 0.6000
```

Create two fits using the custom equation and start points, and define two different sets of excluded points, using an index vector and an expression. Use `Exclude`

to remove outliers from your fit.

f1 = fit(x',y',gaussEqn,'Start', startPoints, 'Exclude', [1 10 25])

f1 = General model: f1(x) = a*exp(-((x-b)/c)^2)+d Coefficients (with 95% confidence bounds): a = 1.493 (1.432, 1.554) b = 897.4 (896.5, 898.3) c = 27.9 (26.55, 29.25) d = 0.6519 (0.6367, 0.6672)

f2 = fit(x',y',gaussEqn,'Start', startPoints, 'Exclude', x < 800)

f2 = General model: f2(x) = a*exp(-((x-b)/c)^2)+d Coefficients (with 95% confidence bounds): a = 1.494 (1.41, 1.578) b = 897.4 (896.2, 898.7) c = 28.15 (26.22, 30.09) d = 0.6466 (0.6169, 0.6764)

Plot both fits.

```
plot(f1,x,y)
title('Fit with data points 1, 10, and 25 excluded')
```

```
figure
plot(f2,x,y)
title('Fit with data points excluded such that x < 800')
```

You can define the excluded points as variables before supplying them as inputs to the fit function. The following steps recreate the fits in the previous example and allow you to plot the excluded points as well as the data and the fit.

Load data and define a custom equation and some start points.

```
[x, y] = titanium;
gaussEqn = 'a*exp(-((x-b)/c)^2)+d'
```

gaussEqn = 'a*exp(-((x-b)/c)^2)+d'

startPoints = [1.5 900 10 0.6]

```
startPoints =
1.5000 900.0000 10.0000 0.6000
```

Define two sets of points to exclude, using an index vector and an expression.

exclude1 = [1 10 25]; exclude2 = x < 800;

Create two fits using the custom equation, startpoints, and the two different excluded points.

f1 = fit(x',y',gaussEqn,'Start', startPoints, 'Exclude', exclude1); f2 = fit(x',y',gaussEqn,'Start', startPoints, 'Exclude', exclude2);

Plot both fits and highlight the excluded data.

```
plot(f1,x,y,exclude1)
title('Fit with data points 1, 10, and 25 excluded')
```

```
figure;
plot(f2,x,y,exclude2)
title('Fit with data points excluded such that x < 800')
```

For a surface fitting example with excluded points, load some surface data and create and plot fits specifying excluded data.

load franke f1 = fit([x y],z,'poly23', 'Exclude', [1 10 25]); f2 = fit([x y],z,'poly23', 'Exclude', z > 1); figure plot(f1, [x y], z, 'Exclude', [1 10 25]); title('Fit with data points 1, 10, and 25 excluded')

figure plot(f2, [x y], z, 'Exclude', z > 1); title('Fit with data points excluded such that z > 1')

Load some data and fit a smoothing spline curve through variables `month`

and `pressure`

, and return goodness of fit information and the output structure. Plot the fit and the residuals against the data.

load enso; [curve, goodness, output] = fit(month,pressure,'smoothingspline'); plot(curve,month,pressure); xlabel('Month'); ylabel('Pressure');

Plot the residuals against the x-data (`month`

).

plot( curve, month, pressure, 'residuals' ) xlabel( 'Month' ) ylabel( 'Residuals' )

Use the data in the `output`

structure to plot the residuals against the y-data (`pressure`

).

plot( pressure, output.residuals, '.' ) xlabel( 'Pressure' ) ylabel( 'Residuals' )

Generate data with an exponential trend, and then fit the data using the first equation in the curve fitting library of exponential models (a single-term exponential). Plot the results.

```
x = (0:0.2:5)';
y = 2*exp(-0.2*x) + 0.5*randn(size(x));
f = fit(x,y,'exp1');
plot(f,x,y)
```

You can use anonymous functions to make it
easier to pass other data into the `fit`

function.

Load data and set `Emax`

to `1`

before
defining your anonymous function:

```
data = importdata( 'OpioidHypnoticSynergy.txt' );
Propofol = data.data(:,1);
Remifentanil = data.data(:,2);
Algometry = data.data(:,3);
Emax = 1;
```

Define the model equation as an anonymous function:

Effect = @(IC50A, IC50B, alpha, n, x, y) ... Emax*( x/IC50A + y/IC50B + alpha*( x/IC50A )... .* ( y/IC50B ) ).^n ./(( x/IC50A + y/IC50B + ... alpha*( x/IC50A ) .* ( y/IC50B ) ).^n + 1);

Use the anonymous function `Effect`

as
an input to the `fit`

function, and plot the results:

AlgometryEffect = fit( [Propofol, Remifentanil], Algometry, Effect, ... 'StartPoint', [2, 10, 1, 0.8], ... 'Lower', [-Inf, -Inf, -5, -Inf], ... 'Robust', 'LAR' ) plot( AlgometryEffect, [Propofol, Remifentanil], Algometry )

For more examples using anonymous functions and other custom
models for fitting, see the `fittype`

function.

For the properties `Upper`

, `Lower`

, and `StartPoint`

, you need to find the order of the entries for coefficients.

Create a fit type.

```
ft = fittype('b*x^2+c*x+a');
```

Get the coefficient names and order using the `coeffnames`

function.

coeffnames(ft)

ans = 3x1 cell array {'a'} {'b'} {'c'}

Note that this is different from the order of the coefficients in the expression used to create `ft`

with `fittype`

.

Load data, create a fit and set the start points.

load enso fit(month,pressure,ft,'StartPoint',[1,3,5])

ans = General model: ans(x) = b*x^2+c*x+a Coefficients (with 95% confidence bounds): a = 10.94 (9.362, 12.52) b = 0.0001677 (-7.985e-05, 0.0004153) c = -0.0224 (-0.06559, 0.02079)

This assigns initial values to the coefficients as follows: `a = 1`

, `b = 3`

, `c = 5`

.

Alternatively, you can get the fit options and set start points and lower bounds, then refit using the new options.

options = fitoptions(ft) options.StartPoint = [10 1 3]; options.Lower = [0 -Inf 0]; fit(month,pressure,ft,options)

options = Normalize: 'off' Exclude: [] Weights: [] Method: 'NonlinearLeastSquares' Robust: 'Off' StartPoint: [1x0 double] Lower: [1x0 double] Upper: [1x0 double] Algorithm: 'Trust-Region' DiffMinChange: 1.0000e-08 DiffMaxChange: 0.1000 Display: 'Notify' MaxFunEvals: 600 MaxIter: 400 TolFun: 1.0000e-06 TolX: 1.0000e-06 ans = General model: ans(x) = b*x^2+c*x+a Coefficients (with 95% confidence bounds): a = 10.23 (9.448, 11.01) b = 4.335e-05 (-1.82e-05, 0.0001049) c = 5.523e-12 (fixed at bound)

`x`

— Data to fitmatrix

Data to fit, specified as a matrix with either one (curve fitting)
or two (surface fitting) columns. You can specify variables in a MATLAB table
using `tablename.varname`

. Cannot contain `Inf`

or `NaN`

.
Only the real parts of complex data are used in the fit.

**Example: **`x`

**Example: **`[x,y]`

**Data Types: **`double`

`y`

— Data to fitvector

Data to fit, specified as a column vector with the same number
of rows as `x`

. You can specify a variable in a MATLAB table
using `tablename.varname`

. Cannot contain `Inf`

or `NaN`

.
Only the real parts of complex data are used in the fit.

Use `prepareCurveData`

or `prepareSurfaceData`

if
your data is not in column vector form.

**Data Types: **`double`

`z`

— Data to fitvector

Data to fit, specified as a column vector with the same number
of rows as `x`

. You can specify a variable in a MATLAB table
using `tablename.varname`

. Cannot contain `Inf`

or `NaN`

.
Only the real parts of complex data are used in the fit.

Use `prepareSurfaceData`

if your data is
not in column vector form. For example, if you have 3 matrices, or
if your data is in grid vector form, where ```
length(X) = n,
length(Y) = m
```

and `size(Z) = [m,n]`

.

**Data Types: **`double`

`fitType`

— Model type to fitcharacter vector | cell array of character vectors | anonymous function |

`fittype`

Model type to fit, specified as a library model name character
vector, a MATLAB expression, a cell array of linear models terms,
an anonymous function, or a `fittype`

constructed
with the `fittype`

function.
You can use any of the valid first inputs to `fittype`

as
an input to `fit`

.

For a list of library model names, see Model Names and Equations. This table shows some common examples.

Library Model Name | Description |
---|---|

| Linear polynomial curve |

| Linear polynomial surface |

| Quadratic polynomial curve |

| Piecewise linear interpolation |

| Piecewise cubic interpolation |

| Smoothing spline (curve) |

| Local linear regression (surface) |

To fit custom models, use a MATLAB expression, a cell array
of linear model terms, an anonymous function, or create a `fittype`

with
the `fittype`

function and use
this as the `fitType`

argument. For an example,
see Fit a Custom Model Using an Anonymous Function. For examples
of linear model terms, see the `fitType`

function.

**Example: **'poly2'

`fitOptions`

— Algorithm options`fitoptions`

Algorithm options constructed using the `fitoptions`

function. This is an alternative
to specifying name-value pair arguments for fit options.

Specify optional
comma-separated pairs of `Name,Value`

arguments. `Name`

is
the argument name and `Value`

is the corresponding value.
`Name`

must appear inside single quotes (`' '`

). You can
specify several name and value pair arguments in any order as
`Name1,Value1,...,NameN,ValueN`

.

```
'Lower',[0,0],'Upper',[Inf,max(x)],'StartPoint',[1
1]
```

specifies fitting method, bounds, and start points.`'Normalize'`

— Option to center and scale data`'off'`

(default) | `'on'`

Option to center and scale the data, specified as the comma-separated
pair consisting of `'Normalize'`

and `'on'`

or `'off'`

.

**Data Types: **`char`

`'Exclude'`

— Points to exclude from fitexpression | index vector | logical vector | empty

Points to exclude from the fit, specified as the comma-separated
pair consisting of `'Exclude'`

and one of:

An expression describing a logical vector, e.g.,

`x > 10`

.A vector of integers indexing the points you want to exclude, e.g.,

`[1 10 25]`

.A logical vector for all data points where

`true`

represents an outlier, created by`excludedata`

.

For an example, see Exclude Points from Fit.

**Data Types: **`logical`

| `double`

`'problem'`

— Values to assign to problem-dependent constantscell array | double

Values to assign to the problem-dependent constants, specified
as the comma-separated pair consisting of `'problem'`

and
a cell array with one element per problem dependent constant. For
details, see `fittype`

.

**Data Types: **`cell`

| `double`

`'SmoothingParam'`

— Smoothing parameterscalar value in the range (0,1)

Smoothing parameter, specified as the comma-separated pair consisting
of `'SmoothingParam'`

and a scalar value between
0 and 1. The default value depends on the data set. Only available
if the fit type is `smoothingspline`

.

**Data Types: **`double`

`'Span'`

— Proportion of data points to use in local regressions0.25 (default) | scalar value in the range (0,1)

Proportion of data points to use in local regressions, specified
as the comma-separated pair consisting of `'Span'`

and
a scalar value between 0 and 1. Only available if the fit type is `lowess`

or `loess`

.

**Data Types: **`double`

`'Robust'`

— Robust linear least-squares fitting method`'off'`

(default) | `LAR`

| `Bisquare`

Robust linear least-squares fitting method, specified as the
comma-separated pair consisting of `'Robust'`

and
one of these values:

`'LAR'`

specifies the least absolute residual method.`'Bisquare'`

specifies the bisquare weights method.

Available when the fit type `Method`

is `LinearLeastSquares`

or `NonlinearLeastSquares`

.

**Data Types: **`char`

`'Lower'`

— Lower bounds on coefficients to be fitted[ ] (default) | vector

Lower bounds on the coefficients to be fitted, specified as
the comma-separated pair consisting of `'Lower'`

and
a vector. The default value is an empty vector, indicating that the
fit is unconstrained by lower bounds. If bounds are specified, the
vector length must equal the number of coefficients. Find the order
of the entries for coefficients in the vector value by using the `coeffnames`

function. For an example,
see Find Coefficient Order to Set Start Points and Bounds. Individual
unconstrained lower bounds can be specified by `-Inf`

.

Available when the `Method`

is `LinearLeastSquares`

or `NonlinearLeastSquares`

.

**Data Types: **`double`

`'Upper'`

— Upper bounds on coefficients to be fitted[ ] (default) | vector

Upper bounds on the coefficients to be fitted, specified as
the comma-separated pair consisting of `'Upper'`

and
a vector. The default value is an empty vector, indicating that the
fit is unconstrained by upper bounds. If bounds are specified, the
vector length must equal the number of coefficients. Find the order
of the entries for coefficients in the vector value by using the `coeffnames`

function. For an example,
see Find Coefficient Order to Set Start Points and Bounds. Individual
unconstrained upper bounds can be specified by `+Inf`

.

Available when the `Method`

is `LinearLeastSquares`

or `NonlinearLeastSquares`

.

**Data Types: **`logical`

`'StartPoint'`

— Initial values for the coefficients[ ] (default) | vector

Initial values for the coefficients, specified as the comma-separated
pair consisting of `'StartPoint'`

and a vector. Find
the order of the entries for coefficients in the vector value by using
the `coeffnames`

function. For
an example, see Find Coefficient Order to Set Start Points and Bounds.

If no start points (the default value of an empty vector) are
passed to the `fit`

function,
starting points for some library models are determined heuristically.
For rational and Weibull models, and all custom nonlinear models,
the toolbox selects default initial values for coefficients uniformly
at random from the interval (0,1). As a result, multiple fits using
the same data and model might lead to different fitted coefficients.
To avoid this, specify initial values for coefficients with a `fitoptions`

object or a vector value
for the `StartPoint`

value.

Available when the `Method`

is `NonlinearLeastSquares`

.

**Data Types: **`double`

`'Algorithm'`

— Algorithm to use for fitting procedure'Levenberg-Marquardt' (default) | 'Trust-Region'

Algorithm to use for the fitting procedure, specified as the
comma-separated pair consisting of `'Algorithm'`

and
either `'Levenberg-Marquardt'`

or `'Trust-Region'`

.

Available when the `Method`

is `NonlinearLeastSquares`

.

**Data Types: **`char`

`'DiffMaxChange'`

— Maximum change in coefficients for finite difference gradients0.1 (default)

Maximum change in coefficients for finite difference gradients,
specified as the comma-separated pair consisting of `'DiffMaxChange'`

and
a scalar.

Available when the `Method`

is `NonlinearLeastSquares`

.

**Data Types: **`double`

`'DiffMinChange'`

— Minimum change in coefficients for finite difference gradients10

Minimum change in coefficients for finite difference gradients,
specified as the comma-separated pair consisting of `'DiffMinChange'`

and
a scalar.

Available when the `Method`

is `NonlinearLeastSquares`

.

**Data Types: **`double`

`'Display'`

— Display option in Command Window`'notify'`

(default) | `'final'`

| `'iter'`

| `'off'`

Display option in the command window, specified as the comma-separated
pair consisting of `'Display'`

and one of these options:

`'notify'`

displays output only if the fit does not converge.`'final'`

displays only the final output.`'iter'`

displays output at each iteration.`'off'`

displays no output.

Available when the `Method`

is `NonlinearLeastSquares`

.

**Data Types: **`char`

`'MaxFunEvals'`

— Maximum number of evaluations of model allowed`600`

(default)Maximum number of evaluations of the model allowed, specified
as the comma-separated pair consisting of `'MaxFunEvals'`

and
a scalar.

Available when the `Method`

is `NonlinearLeastSquares`

.

**Data Types: **`double`

`'MaxIter'`

— Maximum number of iterations allowed for fit `400`

(default)Maximum number of iterations allowed for the fit, specified
as the comma-separated pair consisting of `'MaxIter'`

and
a scalar.

Available when the `Method`

is `NonlinearLeastSquares`

.

**Data Types: **`double`

`'TolFun'`

— Termination tolerance on model value10

Termination tolerance on the model value, specified as the comma-separated
pair consisting of `'TolFun'`

and a scalar.

Available when the `Method`

is `NonlinearLeastSquares`

.

**Data Types: **`double`

`'TolX'`

— Termination tolerance on coefficient values10

Termination tolerance on the coefficient values, specified as
the comma-separated pair consisting of `'TolX'`

and
a scalar.

Available when the `Method`

is `NonlinearLeastSquares`

.

**Data Types: **`double`

`fitobject`

— Fit result`cfit`

| `sfit`

Fit result, returned as a `cfit`

(for
curves) or `sfit`

(for surfaces)
object. See Fit Postprocessing for functions for plotting, evaluating,
calculating confidence intervals, integrating, differentiating, or
modifying your fit object.

`gof`

— Goodness-of-fit statistics`gof`

structure | Goodness-of-fit statistics, returned as the `gof`

structure
including the fields in this table.

Field | Value |
---|---|

| Sum of squares due to error |

| R-squared (coefficient of determination) |

| Degrees of freedom in the error |

| Degree-of-freedom adjusted coefficient of determination |

| Root mean squared error (standard error) |

`output`

— Fitting algorithm information`output`

structureFitting algorithm information, returned as the `output`

structure
containing information associated with the fitting algorithm.

Fields depend on the algorithm. For example, the `output`

structure
for nonlinear least-squares algorithms includes the fields shown in
this table.

Field | Value |
---|---|

| Number of observations (response values) |

| Number of unknown parameters (coefficients) to fit |

| Vector of residuals |

| Jacobian matrix |

| Describes the exit condition of the algorithm. Positive flags indicate convergence, within tolerances. Zero flags indicate that the maximum number of function evaluations or iterations was exceeded. Negative flags indicate that the algorithm did not converge to a solution. |

| Number of iterations |

| Number of function evaluations |

| Measure of first-order optimality (absolute maximum of gradient components) |

| Fitting algorithm employed |

`confint`

|`feval`

|`fitoptions`

|`fittype`

|`plot`

|`prepareCurveData`

|`prepareSurfaceData`

You clicked a link that corresponds to this MATLAB command:

Run the command by entering it in the MATLAB Command Window. Web browsers do not support MATLAB commands.

Was this topic helpful?

You can also select a location from the following list:

- America Latina (Español)
- Canada (English)
- United States (English)

- Belgium (English)
- Denmark (English)
- Deutschland (Deutsch)
- España (Español)
- Finland (English)
- France (Français)
- Ireland (English)
- Italia (Italiano)
- Luxembourg (English)

- Netherlands (English)
- Norway (English)
- Österreich (Deutsch)
- Portugal (English)
- Sweden (English)
- Switzerland
- United Kingdom (English)