Documentation

This is machine translation

Translated by Microsoft
Mouseover text to see original. Click the button below to return to the English verison of the page.

Note: This page has been translated by MathWorks. Please click here
To view all translated materals including this page, select Japan from the country navigator on the bottom of this page.

Generate Non-Clocked Digital Data

This example shows how to write data to two lines on an NI 625

Find devices connected to your system and find the ID for NI 6255.

d = daq.getDevices;
d = 

Data acquisition devices:

index Vendor Device ID          Description         
----- ------ --------- -----------------------------
1     ni     Dev1      National Instruments USB-6255
2     ni     Dev2      National Instruments USB-6363

Create a session and add two lines from port 0 on Dev1.

s = daq.createSession('ni');
addDigitalChannel(s,'Dev1','Port0/Line0:1','OutputOnly')
Data acquisition session using National Instruments hardware:
   Clocked operations using startForeground and startBackground are disabled.
   Only on-demand operations using inputSingleScan and outputSingleScan can be done.
   Number of channels: 2
      index Type Device   Channel   MeasurementType Range Name
      ----- ---- ------ ----------- --------------- ----- ----
      1     dio  Dev1   port0/line0 OutputOnly      n/a
      2     dio  Dev1   port0/line1 OutputOnly      n/a

Generate digital data.

outputSingleScan(s,[1,0])
Was this topic helpful?