Documentation

This is machine translation

Translated by Microsoft
Mouseover text to see original. Click the button below to return to the English verison of the page.

Note: This page has been translated by MathWorks. Please click here
To view all translated materals including this page, select Japan from the country navigator on the bottom of this page.

Gain

Waveform output gain

Description

When using waveform function generation channels, Gain represents the value by which the scaled waveform data is multiplied to get the output data.

Values

The waveform gain can be between –5 and 5. Ensure that Gain x Voltage + Offset falls within the valid rages of output voltage of the device.

Example

Change the gain of the waveform function generation channel to 2 volts.

s = daq.createSession('digilent');
fgenCh = addFunctionGeneratorChannel(s, 'AD1', 1, 'Sine');
fgenCh.Gain = 2
fgenCh = 

Data acquisition sine waveform generator '1' on device 'AD1':

              Phase: 0
              Range: -5.0 to +5.0 Volts
     TerminalConfig: SingleEnded
               Gain: 2
             Offset: 0
          Frequency: 4096
       WaveformType: Sine
     FrequencyLimit: [0.0 25000000.0]
               Name: ''
                 ID: '1'
             Device: [1x1 daq.di.DeviceInfo]
    MeasurementType: 'Voltage'

See Also

Functions

Properties

Was this topic helpful?