Documentation

This is machine translation

Translated by Microsoft
Mouseover text to see original. Click the button below to return to the English verison of the page.

Note: This page has been translated by MathWorks. Please click here
To view all translated materals including this page, select Japan from the country navigator on the bottom of this page.

Offset

Specify DC offset of waveform

Description

When using waveform function generation channels, Offset represents offsetting of a signal from zero, or the mean value of the waveform.

Values

The waveform offset can be between –5 and 5. Ensure that Gain x Voltage + Offset falls within the valid rages of output voltage of the device.

Example

Change the offset of the waveform function generation channel to 2 volts.

s = daq.createSession('digilent');
fgenCh = addFunctionGeneratorChannel(s, 'AD1', 1, 'Sine');
fgenCh.Offset = 2
fgenCh = 

Data acquisition sine waveform generator '1' on device 'AD1':

              Phase: 0
              Range: -5.0 to +5.0 Volts
     TerminalConfig: SingleEnded
               Gain: 0
             Offset: 2
          Frequency: 4096
       WaveformType: Sine
     FrequencyLimit: [0.0 25000000.0]
               Name: ''
                 ID: '1'
             Device: [1x1 daq.di.DeviceInfo]
    MeasurementType: 'Voltage'

See Also

Functions

Properties

Was this topic helpful?