Indicate number of scans output by hardware
In the session-based interface, the
displays the number of scans output by the hardware after you start
the operation using
Tip: The value depends on information from the hardware.
This read-only value is based on the output of the hardware configured for your session.
Generate data on an analog output channel and to see how many scans are output by the hardware.
Create a session and add an analog output channel.
s = daq.createSession('ni'); ch = addAnalogOutputChannel(s,'Dev1','ao1','voltage');
Queue some output data and start the generation.
s.queueOutputData(linspace(-1, 1, 1000)'); startForeground(s);
ans = 1000