Specify additional waiting time to extract or queue data
Note: You cannot use the legacy interface on 64-bit MATLAB®. See About the Session-Based Interface to acquire and generate data on a 64-bit MATLAB.
Timeout value (in seconds) is added to
the time required to extract data from the engine or queue data to
the engine. Because data is extracted with the
and queued with the
associated only with these two "blocking" functions.
If the requested data is not extracted or queued after waiting
the required time, then a time-out condition occurs and control is
immediately returned to the MATLAB workspace. A time-out is one
of the conditions for stopping an acquisition. When a time-out occurs,
the callback function specified by
Timeout is not associated with hardware time-out
conditions. Possible hardware time-out conditions include
Triggering on a voltage level and that level never occurs
Externally clocking an acquisition and the external clock signal never occurs
Losing the hardware connection
To check for hardware timeouts, you might need to poll the appropriate property value.
AI, AO, common to all channels
Read-only when running
The default value is one second.