Documentation

This is machine translation

Translated by Microsoft
Mouseover text to see original. Click the button below to return to the English verison of the page.

Note: This page has been translated by MathWorks. Please click here
To view all translated materals including this page, select Japan from the country navigator on the bottom of this page.

UseStandardSampleRate

Configure session to use standard sample rates

Description

Use this property to specify if your audio channel uses standard sample rates supported by your device or a user-specified value. To use non-standard sample rates, set the value to false and set the sessions’s Rate to the desired value.

Example

Change Acquisition Rate

Add an audio channel to a session and change the UseStandardSampleRates property.

s = daq.createSession('directsound');
addAudioInputChannel(s,Audio1,1);
s.UseStandardSampleRates = false
s = 

Data acquisition session using DirectSound hardware:
   Will run for 1 second (44100 scans) at 44100 scans/second.
   Number of channels: 1
      index Type Device Channel MeasurementType     Range     Name
      ----- ---- ------ ------- --------------- ------------- ----
      1     audi Audio1 1       Audio           -1.0 to +1.0

Specify a different scan rate.

s.Rate = 8500
s = 

Data acquisition session using DirectSound hardware:
   Will run for 1 second (8500 scans) at 8500 scans/second.
   Number of channels: 1
      index Type Device Channel MeasurementType     Range     Name
      ----- ---- ------ ------- --------------- ------------- ----
      1     audi Audio3 1       Audio           -1.0 to +1.0
Was this topic helpful?