This example uses Parallel Computing Toolbox™ to perform a Fast Fourier Transform (FFT) on a GPU. A common use of FFTs is to find the frequency components of a signal buried in a noisy time-domain signal.

First we simulate the signal. Consider data sampled at 1000 Hz. We start by forming a time axis for our data running for a large number of samples. The signal consists of two harmonic components. We use the `gpuArray`

function to transfer data to the GPU for further processing. We start by setting up the time vector `timeVec`

, and then calculate `signal`

as a combination of two sinusoids at frequencies `freq1`

and `freq2`

.

sampleFreq = 1000; sampleTime = 1/sampleFreq; numSamples = 2^23; timeVec = gpuArray( (0:numSamples-1) * sampleTime ); freq1 = 2 * pi * 50; freq2 = 2 * pi * 120; signal = sin( freq1 .* timeVec ) + sin( freq2 .* timeVec );

We add some random noise to the signal.

signal = signal + 2 * randn( size( timeVec ), 'gpuArray' ); plot( signal(1:100) ); title( 'Noisy time-domain signal' );

Clearly, it is difficult to identify the frequency components from looking at this signal. We can see the frequency components by taking the discrete Fourier transform using the Fast Fourier Transform. Because we sent `signal`

to the GPU, the FFT is performed on the GPU.

transformedSignal = fft( signal );

The power spectral density measures the energy at various frequencies.

powerSpectrum = transformedSignal .* conj(transformedSignal) ./ numSamples;

We can plot the powerSpectrum directly

frequencyVector = sampleFreq/2 * linspace( 0, 1, numSamples/2 + 1 ); plot( frequencyVector, real(powerSpectrum(1:numSamples/2+1)) ); title( 'Power spectral density' ); xlabel( 'Frequency (Hz)' );

Was this topic helpful?