Documentation Center |
Adaptive filter that uses discrete cosine transform
ha = adaptfilt.tdafdct(l,step,leakage,offset,delta,lambda,
coeffs,states)
ha = adaptfilt.tdafdct(l,step,leakage,offset,delta,lambda,
coeffs,states) constructs a transform-domain
adaptive filter ha object that uses the discrete cosine transform
to perform filter adaptation.
For information on how to run data through your adaptive filter object, see the Adaptive Filter Syntaxes section of the reference page for filter.
Entries in the following table describe the input arguments for adaptfilt.tdafdct.
Input Argument | Description |
---|---|
l | Adaptive filter length (the number of coefficients or taps) and it must be a positive integer. l defaults to 10. |
step | Adaptive filter step size. It must be a nonnegative scalar. You can use maxstep to determine a reasonable range of step size values for the signals being processed. step defaults to 0. |
leakage | Leakage parameter of the adaptive filter. When you set this argument to a value between zero and one, you are implementing a leaky version of the TDAFDCT algorithm. leakage defaults to 1 — no leakage. |
offset | Offset for the normalization terms in the coefficient updates. You can use this argument to avoid dividing by zero or by very small numbers when any of the FFT input signal powers become very small. offset defaults to zero. |
delta | Initial common value of all of the transform domain powers. Its initial value should be positive. delta defaults to 5. |
lambda | Averaging factor used to compute the exponentially-windowed estimates of the powers in the transformed signal bins for the coefficient updates. lambda should lie between zero and one. For default filter objects, lambda equals (1 - step). |
coeffs | Initial time domain coefficients of the adaptive filter. Set it to be a length l vector. coeffs defaults to a zero vector of length l. |
states | Initial conditions of the adaptive filter. states defaults to a zero vector with length equal to (l - 1). |
Since your adaptfilt.tdafdct filter is an object, it has properties that define its behavior in operation. Note that many of the properties are also input arguments for creating adaptfilt.tdafdct objects. To show you the properties that apply, this table lists and describes each property for the transform domain filter object.
Name | Range | Description |
---|---|---|
Algorithm | None | Defines the adaptive filter algorithm the object uses during adaptation. |
AvgFactor | Averaging factor used to compute the exponentially-windowed estimates of the powers in the transformed signal bins for the coefficient updates. AvgFactor should lie between zero and one. For default filter objects, AvgFactor equals (1 - step). lambda is the input argument that represent AvgFactor. | |
Coefficients | Vector of elements | Vector containing the initial filter coefficients. It must be a length l vector where l is the number of filter coefficients. coeffs defaults to length l vector of zeros when you do not provide the argument for input. |
FilterLength | Any positive integer | Reports the length of the filter, the number of coefficients or taps. |
Leakage | 0 to 1 | Leakage parameter of the adaptive filter. When you set this argument to a value between zero and one, you are implementing a leaky version of the TDAFDFT algorithm. leakage defaults to 1 — no leakage. |
Offset | Offset for the normalization terms in the coefficient updates. You can use this argument to avoid dividing by zeros or by very small numbers when any of the FFT input signal powers become very small. offset defaults to zero. | |
PersistentMemory | false or true | Determine whether the filter states get restored to their starting values for each filtering operation. The starting values are the values in place when you create the filter. PersistentMemory returns to zero any state that the filter changes during processing. States that the filter does not change are not affected. Defaults to false. |
Power | 2*l element vector | A vector of 2*l elements, each initialized with the value delta from the input arguments. As you filter data, Power gets updated by the filter process. |
States | Vector of elements, data type double | Vector of the adaptive filter states. states defaults to a vector of zeros which has length equal to (l + projectord - 2). |
StepSize | 0 to 1 | Step size. It must be a nonnegative scalar, greater than zero and less than or equal to 1. You can use maxstep to determine a reasonable range of step size values for the signals being processed. step defaults to 0. |
For checking the values of properties for an adaptive filter object, use get(ha) or enter the object name, without a trailing semicolon, at the MATLAB prompt.
Using 1000 iterations, perform a Quadrature Phase Shift Keying (QPSK) adaptive equalization using a 32-coefficient FIR filter.
D = 16; % Number of samples of delay b = exp(1j*pi/4)*[-0.7 1]; % Numerator coefficients of channel a = [1 -0.7]; % Denominator coefficients of channel ntr= 1000; % Number of iterations s = sign(randn(1,ntr+D)) + 1j*sign(randn(1,ntr+D)); %QPSK signal n = 0.1*(randn(1,ntr+D) + 1j*randn(1,ntr+D)); % Noise signal r = filter(b,a,s)+n; % Received signal x = r(1+D:ntr+D); % Input signal (received signal) d = s(1:ntr); % Desired signal (delayed QPSK signal) L = 32; % filter length mu = 0.01; % Step size ha = adaptfilt.tdafdct(L,mu); [y,e] = filter(ha,x,d); subplot(2,2,1); plot(1:ntr,real([d;y;e])); title('In-Phase Components'); legend('Desired','Output','Error'); xlabel('Time Index'); ylabel('Signal Value'); subplot(2,2,2); plot(1:ntr,imag([d;y;e])); title('Quadrature Components'); legend('Desired','Output','Error'); xlabel('Time Index'); ylabel('Signal Value'); subplot(2,2,3); plot(x(ntr-100:ntr),'.'); axis([-3 3 -3 3]); title('Received Signal Scatter Plot'); axis('square'); xlabel('Real[x]'); ylabel('Imag[x]'); grid on; subplot(2,2,4); plot(y(ntr-100:ntr),'.'); axis([-3 3 -3 3]); title('Equalized Signal Scatter Plot'); grid on; axis('square'); xlabel('Real[y]'); ylabel('Imag[y]');
Compare the plots shown in this figure to those in the other time domain filter variations. The comparison should help you select and understand how the variants differ.