Documentation |
Discrete-time, direct-form antisymmetric FIR filter
Refer to dfilt.dfasymfir in Signal Processing Toolbox™ documentation.
hd = dfilt.dfasymfir(b) returns a discrete-time, direct-form, antisymmetric FIR filter object hd, with numerator coefficients b.
Make this filter a fixed-point or single-precision filter by changing the value of the Arithmetic property for the filter hd as follows:
To change to single-precision filtering, enter
set(hd,'arithmetic','single');
To change to fixed-point filtering, enter
set(hd,'arithmetic','fixed');
For more information about the property Arithmetic, refer to Arithmetic.
hd = dfilt.dfasymfir returns a default, discrete-time, direct-form, antisymmetric FIR filter object hd, with b=1. This filter passes the input through to the output unchanged.
The following figure shows the signal flow for the odd-order antisymmetric FIR filter implemented by dfilt.dfasymfir. The even-order filter uses similar flow. To help you see how the filter processes the coefficients, input, and states of the filter, as well as numerical operations, the figure includes the locations of the formatting objects within the signal flow.
To help you understand where and how the filter performs fixed-point arithmetic during filtering, the figure shows various labels associated with data and functional elements in the filter. The following table describes each label in the signal flow and relates the label to the filter properties that are associated with it.
The labels use a common format — a prefix followed by the word "format." In this use, "format" means the word length and fraction length associated with the filter part referred to by the prefix.
For example, the InputFormat label refers to the word length and fraction length used to interpret the data input to the filter. The format properties InputWordLength and InputFracLength (as shown in the table) store the word length and the fraction length in bits. Or consider NumFormat, which refers to the word and fraction lengths (CoeffWordLength, NumFracLength) associated with representing filter numerator coefficients.
Signal Flow Label | Corresponding Word Length Property | Corresponding Fraction Length Property | Related Properties |
---|---|---|---|
AccumFormat | AccumWordLength | AccumFracLength | None |
InputFormat | InputWordLength | InputFracLength | None |
NumFormat | CoeffWordLength | NumFracLength | CoeffAutoScale, , Signed, Numerator |
OutputFormat | OutputWordLength | OutputFracLength | None |
ProductFormat | ProductWordLength | ProductFracLength | None |
TapSumFormat | InputWordLength | InputFracLength | InputFormat |
Most important is the label position in the diagram, which identifies where the format applies.
As one example, look at the label ProductFormat, which always follows a coefficient multiplication element in the signal flow. The label indicates that coefficients leave the multiplication element with the word length and fraction length associated with product operations that include coefficients. From reviewing the table, you see that the ProductFormat refers to the properties ProductFracLength and ProductWordLength that fully define the coefficient format after multiply (or product) operations.
In this table you see the properties associated with an antisymmetric FIR implementation of dfilt objects.
Note The table lists all the properties that a filter can have. Many of the properties are dynamic, meaning they exist only in response to the settings of other properties. You might not see all of the listed properties all the time. To view all the properties for a filter at any time, use get(hd) where hd is a filter. |
For further information about the properties of this filter or any dfilt object, refer to Fixed-Point Filter Properties.
Name | Values | Description |
---|---|---|
AccumFracLength | Any positive or negative integer number of bits [27] | Specifies the fraction length used to interpret data output by the accumulator. |
AccumWordLength | Any integer number of bits[33] | Sets the word length used to store data in the accumulator. |
Arithmetic | fixed for fixed-point filters | Setting this to fixed allows you to modify other filter properties to customize your fixed-point filter. |
CoeffAutoScale | [true], false | Specifies whether the filter automatically chooses the proper fraction length to represent filter coefficients without overflowing. Turning this off by setting the value to false enables you to change the NumFracLength property value to specify the precision used. |
CoeffWordLength | Any integer number of bits [16] | Specifies the word length to apply to filter coefficients. |
FilterInternals | [FullPrecision], SpecifyPrecision | Controls whether the filter automatically sets the output word and fraction lengths, product word and fraction lengths, and the accumulator word and fraction lengths to maintain the best precision results during filtering. The default value, FullPrecision, sets automatic word and fraction length determination by the filter. SpecifyPrecision makes the output and accumulator-related properties available so you can set your own word and fraction lengths for them. |
InputFracLength | Any positive or negative integer number of bits [15] | Specifies the fraction length the filter uses to interpret input data. Also controls TapSumFracLength. |
InputWordLength | Any integer number of bits [16] | Specifies the word length applied to interpret input data. Also determines TapSumWordLength. |
NumFracLength | Any positive or negative integer number of bits [14] | Sets the fraction length used to interpret the numerator coefficients. |
OutputFracLength | Any positive or negative integer number of bits [29] | Determines how the filter interprets the filter output data. You can change the value of OutputFracLength when you set FilerInternals to SpecifyPrecision. |
OutputWordLength | Any integer number of bits [33] | Determines the word length used for the output data. You make this property editable by setting FilterInternals to SpecifyPrecision. |
OverflowMode | saturate, [wrap] | Sets the mode used to respond to overflow conditions in fixed-point arithmetic. Choose from either saturate (limit the output to the largest positive or negative representable value) or wrap (set overflowing values to the nearest representable value using modular arithmetic). The choice you make affects only the accumulator and output arithmetic. Coefficient and input arithmetic always saturates. Finally, products never overflow — they maintain full precision. |
ProductFracLength | Any positive or negative integer number of bits [27] | Specifies the fraction length to use for multiplication operation results. This property becomes writable (you can change the value) when you set ProductMode to SpecifyPrecision. |
ProductWordLength | Any integer number of bits [33] | Specifies the word length to use for multiplication operation results. This property becomes writable (you can change the value) when you set ProductMode to SpecifyPrecision. |
RoundMode | [convergent], ceil, fix, floor, nearest, round | Sets the mode the filter uses to quantize numeric values when the values lie between representable values for the data format (word and fraction lengths).
The choice you make affects only the accumulator and output arithmetic. Coefficient and input arithmetic always round. Finally, products never overflow — they maintain full precision. |
Signed | [true], false | Specifies whether the filter uses signed or unsigned fixed-point coefficients. Only coefficients reflect this property setting. |
States | fi object to match the filter arithmetic setting | Contains the filter states before, during, and after filter operations. States act as filter memory between filtering runs or sessions. The states use fi objects, with the associated properties from those objects. For details, refer to fixed-point objects in Fixed-Point Designer™ documentation. |
Specify a fifth-order direct-form antisymmetric FIR filter structure for a dfilt object, hd, with the following code:
b = [-0.008 0.06 -0.44 0.44 -0.06 0.008]; hd = dfilt.dfasymfir(b);
Specify a fourth-order direct-form antisymmetric FIR filter structure for dfilt object hd, with the following code:
b = [-0.01 0.1 0.0 -0.1 0.01]; hd = dfilt.dfasymfir(b); hd.arithmetic='fixed'; FilterCoefs = get(hd,'numerator'); % or equivalently FilterCoefs = hd.numerator;