This is machine translation

Translated by Microsoft
Mouseover text to see original. Click the button below to return to the English verison of the page.

Note: This page has been translated by MathWorks. Please click here
To view all translated materals including this page, select Japan from the country navigator on the bottom of this page.


Elliptic filter using specification object


hd = design(d,'ellip')
hd = design(d,'ellip',designoption,value,designoption,...


hd = design(d,'ellip') designs an elliptical IIR digital filter using the specifications supplied in the object h.

hd = design(d,'ellip',designoption,value,designoption,...
returns an elliptical or Cauer FIR filter where you specify design options as input arguments.

To determine the available design options, use designopts with the specification object and the design method as input arguments as shown.


For complete help about using ellip, refer to the command line help system. For example, to get specific information about using ellip with d, the specification object, enter the following at the MATLAB prompt.



These examples demonstrate how to use ellip to design filters based on filter specification objects.

Design a Bandpass Filter

Construct the default bandpass filter specification object and design an elliptic filter.

d = fdesign.bandpass;
hd = design(d,'ellip','matchexactly','both');

Design Lowpass Filter

Construct a lowpass object with order, passband-edge frequency, stopband-edge frequency, and passband ripple specifications, and then design an elliptic filter.

d = fdesign.lowpass('n,fp,fst,ap',6,20,25,.8,80);
design(d,'ellip'); % Starts FVtool to display the filter.

Construct a lowpass object with filter order, passband edge frequency, passband ripple, and stopband attenuation specifications, and then design an elliptic filter.

d = fdesign.lowpass('n,fp,ap,ast',6,20,.8,60,80);
design(d,'ellip'); % Starts FVTool to display the filter.

See Also

| |

Introduced in R2011a

Was this topic helpful?