Documentation Center 
Find mean value of input or sequence of inputs
The Mean block computes the mean of each row or column of the input, along vectors of a specified dimension of the input, or of the entire input. The Mean block can also track the mean value in a sequence of inputs over a period of time. To track the mean value in a sequence of inputs, select the Running mean check box.
When you do not select the Running mean check box, the block computes the mean value in each row or column of the input, along vectors of a specified dimension of the input, or of the entire input at each individual sample time. Each element in the output array y is the mean value of the corresponding column, row, vector, or entire input. The output array y depends on the setting of the Find the mean value over parameter. For example, consider a 3dimensional input signal of size MbyNbyP:
Entire input — The output at each sample time is a scalar that contains the mean value of the MbyNbyP input matrix.
y = mean(u(:)) % Equivalent MATLAB code
Each row — The output at each sample time consists of an Mby1byP array, where each element contains the mean value of each vector over the second dimension of the input. For an input that is an MbyN matrix, the output at each sample time is an Mby1 column vector.
y = mean(u,2) % Equivalent MATLAB code
Each column — The output at each sample time consists of a 1byNbyP array, where each element contains the mean value of each vector over the first dimension of the input. For an input that is an MbyN matrix, the output at each sample time is a 1byN row vector.
y = mean(u) % Equivalent MATLAB code
In this mode, the block treats lengthM unoriented vector inputs as Mby1 column vectors.
Specified dimension — The output at each sample time depends on the value of the Dimension parameter. If you set the Dimension to 1, the output is the same as when you select Each column. If you set the Dimension to 2, the output is the same as when you select Each row. If you set the Dimension to 3, the output at each sample time is an MbyN matrix containing the mean value of each vector over the third dimension of the input.
y = mean(u,Dimension) % Equivalent MATLAB code
The mean of a complex input is computed independently for the real and imaginary components, as shown in the following figure.
When you select the Running mean check box, the block tracks the mean value of each channel in a time sequence of inputs. In this mode, you must also specify a value for the Input processing parameter:
When you select Elements as channels (sample based), the block outputs an MbyN array. Each element y_{ij} of the output contains the mean value of the elements u_{ij} for all inputs since the last reset.
When you select Columns as channels (frame based), the block outputs an MbyN matrix. Each element y_{ij} of the output contains the mean of the values in the jth column of all inputs since the last reset, up to and including element u_{ij} of the current input.
When your inputs are of variable size, and you select the Running mean check box, there are two options:
If you set the Input processing parameter to Elements as channels (sample based), the state is reset.
If you set the Input processing parameter to Columns as channels (frame based), then there are two cases:
When the input size difference is in the number of channels (i.e., number of columns), the state is reset.
When the input size difference is in the length of channels (i.e., number of rows), there is no reset and the running operation is carried out as usual.
The block resets the running mean whenever a reset event is detected at the optional Rst port. The reset sample time must be a positive integer multiple of the input sample time.
When a reset event occurs while the Input processing parameter is set to Elements as channels (sample based), the running mean for each channel is initialized to the value in the corresponding channel of the current input. Similarly, when the Input processing parameter is set to Columns as channels (frame based), the running mean for each channel is initialized to the earliest value in each channel of the current input.
You specify the reset event by the Reset port parameter:
None disables the Rst port.
Rising edge — Triggers a reset operation when the Rst input does one of the following:
Rises from a negative value to a positive value or zero
Rises from zero to a positive value, where the rise is not a continuation of a rise from a negative value to zero (see the following figure)
Falling edge — Triggers a reset operation when the Rst input does one of the following:
Falls from a positive value to a negative value or zero
Falls from zero to a negative value, where the fall is not a continuation of a fall from a positive value to zero (see the following figure)
Either edge — Triggers a reset operation when the Rst input is a Rising edge or Falling edge (as described earlier)
Nonzero sample — Triggers a reset operation at each sample time that the Rst input is not zero
Note: When running simulations in the Simulink^{®} MultiTasking mode, reset signals have a onesample latency. Therefore, when the block detects a reset event, there is a onesample delay at the reset port rate before the block applies the reset. For more information on latency and the Simulink tasking modes, see Excess Algorithmic Delay (Tasking Latency) and Scheduling in the Simulink Coder™ User's Guide. 
To calculate the statistical value within a particular region of interest (ROI) of the input, select the Enable ROI processing check box. This option is only available when the Find the mean value over parameter is set to Entire input and the Running mean check box is not selected. ROI processing is only supported for 2D inputs.
Note: Full ROI processing is only available to users who have a Computer Vision System Toolbox™ license. If you only have a DSP System Toolbox™ license, you can still use ROI processing, but are limited to the ROI type Rectangles. 
Use the ROI type parameter to specify whether the ROI is a rectangle, line, label matrix, or binary mask. A binary mask is a binary image that enables you to specify which pixels to highlight, or select. In a label matrix, pixels equal to 0 represent the background, pixels equal to 1 represent the first object, pixels equal to 2 represent the second object, and so on. When the ROI type parameter is set to Label matrix, the Label and Label Numbers ports appear on the block. Use the Label Numbers port to specify the objects in the label matrix for which the block calculates statistics. The input to this port must be a vector of scalar values that correspond to the labeled regions in the label matrix. For more information about the format of the input to the ROI port when the ROI is a rectangle or a line, see the Draw Shapes block reference page.
For rectangular ROIs, use the ROI portion to process parameter to specify whether to calculate the statistical value for the entire ROI or just the ROI perimeter.
Use the Output parameter to specify the block output. The block can output separate statistical values for each ROI or the statistical value for all specified ROIs. This parameter is not available if, for the ROI type parameter, you select Binary mask.
If, for the ROI type parameter, you select Rectangles or Lines, the Output flag indicating if ROI is within image bounds check box appears in the dialog box. If you select this check box, the Flag port appears on the block. The following tables describe the Flag port output based on the block parameters.
Output = Individual statistics for each ROI
Flag Port Output  Description 

0  ROI is completely outside the input image. 
1  ROI is completely or partially inside the input image. 
Output = Single statistic for all ROIs
Flag Port Output  Description 

0  All ROIs are completely outside the input image. 
1  At least one ROI is completely or partially inside the input image. 
If the ROI is partially outside the image, the block only computes the statistical values for the portion of the ROI that is within the image.
If, for the ROI type parameter, you select Label matrix, the Output flag indicating if input label numbers are valid check box appears in the dialog box. If you select this check box, the Flag port appears on the block. The following tables describe the Flag port output based on the block parameters.
Output = Individual statistics for each ROI
Flag Port Output  Description 

0  Label number is not in the label matrix. 
1  Label number is in the label matrix. 
Output = Single statistic for all ROIs
Flag Port Output  Description 

0  None of the label numbers are in the label matrix. 
1  At least one of the label numbers is in the label matrix. 
The following diagram shows the data types used within the Mean block for fixedpoint signals.
You can set the accumulator and output data types in the block dialog, as discussed in Dialog Box.
In the ex_mean_refex_mean_ref model, the Mean block calculates the running mean of a 3by2 matrix input, u. The Input processing parameter is set to Columns as channels (frame based), so the block processes the input as a two channel signal with a frame size of three. The running mean is reset at t=2 by an impulse to the block's Rst port.
The operation of the block is shown in the following figure.
The Main pane of the Mean block dialog appears as follows.
Enables running operation when selected.
Specify how the block should process the input when computing the running mean. You can set this parameter to one of the following options:
Columns as channels (frame based) — When you select this option, the block treats each column of the input as a separate channel.
Elements as channels (sample based) — When you select this option, the block treats each element of the input as a separate channel.
This parameter appears only when you select the Running mean check box.
Note: The option Inherit from input (this choice will be removed  see release notes) will be removed in a future release. See FrameBased Processing in the DSP System Toolbox Release Notes for more information. 
Specify the reset event that causes the block to reset the running mean. The sample time of the input to the Rst port must be a positive integer multiple of the input sample time. This parameter appears only when you select the Running mean check box. For more information, see Resetting the Running Mean.
Specify whether to find the mean value along rows, columns, entire input, or the dimension specified in the Dimension parameter. For more information, see Basic Operation.
Select to treat samplebased lengthM row vector inputs as Mby1 column vectors. This parameter is only visible when the Find the mean value over parameter is set to Each column.
Note: This check box will be removed in a future release. See SampleBased Row Vector Processing Changes in the DSP System Toolbox Release Notes. 
Specify the dimension (onebased value) of the input signal, over which the mean is computed. The value of this parameter cannot exceed the number of dimensions in the input signal. This parameter is only visible when the Find the mean value over parameter is set to Specified dimension.
Select this check box to calculate the statistical value within a particular region of each image. This parameter is only available when the Find the mean value over parameter is set to Entire input, and the block is not in running mode.
Specify the type of ROI you want to use. Your choices are Rectangles, Lines, Label matrix, or Binary mask.
Specify whether you want to calculate the statistical value for the entire ROI or just the ROI perimeter. This parameter is only visible if, for the ROI type parameter, you specify Rectangles.
Specify the block output. The block can output a vector of separate statistical values for each ROI or a scalar value that represents the statistical value for all the specified ROIs. This parameter is not available if, for the ROI type parameter, you select Binary mask.
Output flag indicating if ROI is within image bounds
Output flag indicating if label numbers are valid
When you select either of these check boxes, the Flag port appears on the block. For a description of the Flag port output, see the tables in ROI Processing.
The Output flag indicating if ROI is within image bounds check box is only visible when you select Rectangles or Lines as the ROI type.
The Output flag indicating if label numbers are valid check box is only visible when you select Label matrix for the ROI type parameter.
The Data Types pane of the Mean block dialog appears as follows.
Select the rounding mode for fixedpoint operations.
Select the overflow mode for fixedpoint operations.
Specify the accumulator data type. See FixedPoint Data Types for illustrations depicting the use of the accumulator data type in this block. You can set this parameter to:
A rule that inherits a data type, for example, Inherit: Same as input
An expression that evaluates to a valid data type, for example, fixdt([],16,0)
Click the Show data type assistant button to display the Data Type Assistant, which helps you set the Accumulator data type parameter.
See Specify Data Types Using Data Type Assistant for more information.
Specify the output data type. See FixedPoint Data Types for illustrations depicting the use of the output data type in this block. You can set it to:
A rule that inherits a data type, for example, Inherit: Same as accumulator
An expression that evaluates to a valid data type, for example, fixdt([],16,0)
Click the Show data type assistant button to display the Data Type Assistant, which helps you set the Output data type parameter.
See Specify Block Output Data Types for more information.
Specify the minimum value that the block should output. The default value is [] (unspecified). Simulink software uses this value to perform:
Simulation range checking (see Signal Ranges)
Automatic scaling of fixedpoint data types
Specify the maximum value that the block should output. The default value is [] (unspecified). Simulink software uses this value to perform:
Simulation range checking (see Signal Ranges)
Automatic scaling of fixedpoint data types
Select this parameter to prevent the fixedpoint tools from overriding the data types you specify on the block mask.
Port  Supported Data Types 

Input 

Reset 

ROI  Rectangles and lines:
Binary Mask:

Label 

Label Numbers 

Output 

Flag 

Maximum  DSP System Toolbox 
Median  DSP System Toolbox 
Minimum  DSP System Toolbox 
Standard Deviation  DSP System Toolbox 
mean  MATLAB 