Documentation

This is machine translation

Translated by Microsoft
Mouseover text to see original. Click the button below to return to the English verison of the page.

Note: This page has been translated by MathWorks. Please click here
To view all translated materals including this page, select Japan from the country navigator on the bottom of this page.

Overlap-Add FFT Filter (Obsolete)

Implement overlap-add method of frequency-domain filtering

Library

Filtering / Filter Implementations

dsparch4

Description

Note

The Overlap-Add FFT Filter block has been replaced with the Frequency-Domain FIR Filter block. Existing instances of the Overlap-Add FFT Filter block continue to run.

The Overlap-Add FFT Filter block uses an FFT to implement the overlap-add method, a technique that combines successive frequency-domain filtered sections of an input sequence.

The block accepts vector or matrix inputs, and treats each column of the input as an individual channel. The block unbuffers the input data into row vectors such that the length of the output vector is equal to the number of channels in the input. The data output rate of the block is M times faster than its data input rate, where M is the length of the columns in the input (frame-size).

The block breaks the scalar input sequence u, of length nu, into length-L nonoverlapping data sections,

which it linearly convolves with the filter's FIR coefficients,

H(z)=B(z)=b1+b2z1++bn+1zn

The numerator coefficients for H(z) are specified as a vector by the FIR coefficients parameter. The coefficient vector, b = [b(1) b(2) ... b(n+1)], can be generated by one of the filter design functions in the Signal Processing Toolbox™ product, such as fir1. All filter states are internally initialized to zero.

When either the filter coefficients or the inputs to the block are complex, the Output parameter should be set to Complex. Otherwise, the default Output setting, Real, instructs the block to take only the real part of the solution.

The block's overlap-add operation is equivalent to

y = ifft(fft(u(i:i+L-1),nfft) .* fft(b,nfft))

where you specify nfft in the FFT size parameter as a power-of-two value greater (typically much greater) than n+1. Values for FFT size that are not powers of two are rounded upwards to the nearest power-of-two value to obtain nfft.

The block overlaps successive output sections by n points and sums them.

The first L samples of each summation are output in sequence. The block chooses the parameter L based on the filter order and the FFT size.

L = nfft - n

Latency

In single-tasking operation, the Overlap-Add FFT Filter block has a latency of nfft-n+1 samples. The first nfft-n+1 consecutive outputs from the block are zero; the first filtered input value appears at the output as sample nfft-n+2.

In multitasking operation, the Overlap-Add FFT Filter block has a latency of 2*(nfft-n)+1 samples. The first 2*(nfft-n)+1 consecutive outputs from the block are zero; the first filtered input value appears at the output as sample 2*(nfft-n)+3.

Note

For more information on latency and the Simulink® software tasking modes, see Excess Algorithmic Delay (Tasking Latency) and Time-Based Scheduling and Code Generation (Simulink Coder).

Parameters

FFT size

The size of the FFT, which should be a power-of-two value greater than the length of the specified FIR filter.

FIR coefficients

The filter numerator coefficients.

Output

The complexity of the output; Real or Complex. When the input signal or the filter coefficients are complex, this should be set to Complex.

References

Oppenheim, A. V. and R. W. Schafer. Discrete-Time Signal Processing. Englewood Cliffs, NJ: Prentice Hall, 1989.

Proakis, J. and D. Manolakis. Digital Signal Processing. 3rd ed. Englewood Cliffs, NJ: Prentice-Hall, 1996.

Supported Data Types

  • Double-precision floating point

  • Single-precision floating point

See Also

Overlap-Save FFT FilterDSP System Toolbox™ product

Introduced before R2006a

Was this topic helpful?