# Documentation

### This is machine translation

Translated by
Mouseover text to see original. Click the button below to return to the English verison of the page.

Note: This page has been translated by MathWorks. Please click here
To view all translated materals including this page, select Japan from the country navigator on the bottom of this page.

# phasez

Unwrapped phase response for filter

## Syntax

```[phi,w] = phasez(sysobj) [phi,w] = phasez(sysobj,n) [phi,w] = phasez(sysobj,Name,Value) phasez(sysobj) ```

## Description

```[phi,w] = phasez(sysobj)``` returns the unwrapped phase response `phi` of the filter System object™, `sysobj`, based on the current filter coefficients. The vector `w` contains the frequencies (in radians) at which the function evaluates the phase response. The phase response is evaluated at 8192 points equally spaced around the upper half of the unit circle.

```[phi,w] = phasez(sysobj,n)``` returns the phase response of the filter System object and the corresponding frequencies at `n` points equally spaced around the upper half of the unit circle.

```[phi,w] = phasez(sysobj,Name,Value)``` returns the phase response with additional options specified by one or more `Name,Value` pair arguments.

`phasez(sysobj)` displays the phase response of the filter System object `sysobj` in the `fvtool`.

For more information about optional input arguments for `phasez`, refer to `phasez` in Signal Processing Toolbox™ documentation.

## Examples

collapse all

```Fs = 8000; Fcutoff = 2000; FIRFilt = dsp.FIRFilter('Numerator', fir1(130,Fcutoff/(Fs/2))); ```

`phasez` computes the unwrapped phase response of the filter and displays it using fvtool

```phasez(FIRFilt); ```

## Input Arguments

collapse all

 `sysobj` Filter System object. The following Filter System objects are supported by this analysis function: `n` Number of samples. For an FIR filter where `n` is a power of two, the computation is done faster using FFTs. Default: 8192

### Name-Value Pair Arguments

Specify optional comma-separated pairs of `Name,Value` arguments. `Name` is the argument name and `Value` is the corresponding value. `Name` must appear inside single quotes (`' '`). You can specify several name and value pair arguments in any order as `Name1,Value1,...,NameN,ValueN`.

collapse all

Specify the arithmetic used during analysis. When you specify `'double'` or `'single'`, the function performs double- or single-precision analysis. When you specify `'fixed'` , the arithmetic changes depending on the setting of the `CoefficientDataType` property and whether the System object is locked or unlocked.

When you do not specify the arithmetic for non-CIC structures, the function uses double-precision arithmetic if the filter System object is in an unlocked state. If the System object is locked, the function performs analysis based on the locked input data type. CIC structures only support fixed-point arithmetic.

## Output Arguments

 `phi` Phase response vector of length `n`. If `n` is not specified, the function uses a default value of `8192`. `w` Frequency vector of length `n`, in radians/sample. `w` consists of `n` points equally spaced around the upper half of the unit circle (from 0 to π radians/sample). If `n` is not specified, the function uses a default value of `8192`.

#### Introduced in R2011a

Was this topic helpful?

Watch now