Note: This page has been translated by MathWorks. Please click here

To view all translated materials including this page, select Japan from the country navigator on the bottom of this page.

To view all translated materials including this page, select Japan from the country navigator on the bottom of this page.

This section lists the Simulink^{®} blocks
in DSP System
Toolbox™ which support fixed-point operations. This
information is also available in the Simulink block
data type support table for DSP System
Toolbox. To access this
table, type the command below in the MATLAB^{®} command
prompt.

showsignalblockdatatypetable

Block | Description |
---|---|

Sources | |

Constant | Generate constant value |

Discrete Impulse | Generate discrete impulse |

Identity Matrix | Generate matrix with ones on main diagonal and zeros elsewhere |

NCO | Generate real or complex sinusoidal signals |

NCO HDL Optimized | Generate real or complex sinusoidal signals—optimized for HDL code generation |

Signal From Workspace | Import signal from MATLAB workspace |

Sine Wave | Generate continuous or discrete sine wave |

Sinks | |

Array Plot | Display vectors or arrays |

Display | Show value of input |

Matrix Viewer | Display matrices as color images |

Spectrum Analyzer | Display frequency spectrum of time-domain signals |

Time Scope | Display time-domain signals |

To Workspace | Write data to MATLAB workspace |

Triggered To Workspace | Write input sample to MATLAB workspace when triggered |

Vector Scope | Display vector or matrix of time-domain, frequency-domain, or user-defined data |

Waterfall | View vectors of data over time |

Adaptive
Filters | |

LMS Filter | Compute output, error, and weights using LMS adaptive algorithm |

Filter Designs | |

CIC Compensation Decimator | Compensate for CIC filter using FIR decimator |

CIC Compensation Interpolator | Compensate for CIC filter using FIR interpolator |

Differentiator Filter | Direct form FIR full band differentiator filter |

FIR Halfband Decimator | Decimate signal using polyphase FIR halfband filter |

FIR Halfband Interpolator | Interpolate signal using polyphase FIR half band filter |

Highpass Filter | Design FIR or IIR highpass filter |

Lowpass Filter | Design FIR or IIR lowpass filter |

Filter Implementations | |

Allpole Filter | Model allpole filters |

Biquad Filter | Model biquadratic IIR (SOS) filters |

Discrete FIR Filter | Model FIR filters |

Discrete Filter | Model Infinite Impulse Response (IIR) filters |

Filter Realization Wizard | Construct filter realizations using digital filter blocks or Sum, Gain, and Delay blocks |

Multirate
Filters | |

CIC Decimation | Decimate signal using Cascaded Integrator-Comb filter |

CIC Interpolation | Interpolate signal using Cascaded Integrator-Comb filter |

FIR Decimation | Filter and downsample input signals |

FIR Interpolation | Upsample and filter input signals |

FIR Rate Conversion | Upsample, filter, and downsample input signals |

FIR Rate Conversion HDL Optimized | Upsample, filter, and downsample input signals—optimized for HDL code generation |

Two-Channel Analysis Subband Filter | Decompose signal into high-frequency and low-frequency subbands |

Two-Channel Synthesis Subband Filter | Reconstruct signal from high-frequency and low-frequency subbands |

Linear Prediction | |

Levinson-Durbin | Solve linear system of equations using Levinson-Durbin recursion |

Transforms | |

DCT | Discrete cosine transform (DCT) of input |

FFT | Fast Fourier transform (FFT) of input |

FFT HDL Optimized | Fast Fourier transform—optimized for HDL code generation |

IDCT | Inverse discrete cosine transform (IDCT) of input |

IFFT | Inverse fast Fourier transform (IFFT) of input |

IFFT HDL Optimized | Inverse fast Fourier transform—optimized for HDL code generation |

Magnitude FFT | Compute nonparametric estimate of spectrum using periodogram method |

Short-Time FFT | Nonparametric estimate of spectrum using short-time, fast Fourier transform (FFT) method |

Statistics | |

Autocorrelation | Autocorrelation of vector or matrix input |

Correlation | Cross-correlation of two inputs |

Histogram | Generate histogram of input or sequence of inputs |

Maximum | Find maximum values in input or sequence of inputs |

Mean | Find mean value of input or sequence of inputs |

Median | Find median value of input |

Minimum | Find minimum values in input or sequence of inputs |

Sort | Sort input elements by value |

Variance | Compute variance of input or sequence of inputs |

Quantizers | |

Scalar Quantizer Decoder | Convert each index value into quantized output value |

Scalar Quantizer Encoder | Encode each input value by associating it with index value of quantization region |

Vector Quantizer Decoder | Find vector quantizer codeword that corresponds to given, zero-based index value |

Vector Quantizer Encoder | For given input, find index of nearest codeword based on Euclidean or weighted Euclidean distance measure |

Signal Operations | |

Constant Ramp | Generate ramp signal with length based on input dimensions |

Convolution | Convolution of two inputs |

DC Blocker | lock DC component |

Digital Down-Converter | Translate digital signal from Intermediate Frequency (IF) band to baseband and decimate it |

Digital Up-Converter | Interpolate digital signal and translate it from baseband to Intermediate Frequency (IF) band |

Downsample | Resample input at lower rate by deleting samples |

Farrow Rate Converter | Polynomial sample-rate converter with arbitrary conversion factor |

NCO | Generate real or complex sinusoidal signals |

NCO HDL Optimized | Generate real or complex sinusoidal signals—optimized for HDL code generation |

Offset | Truncate vectors by removing or keeping beginning or ending values |

Pad | Pad or truncate specified dimension(s) |

Peak Finder | Determine whether each value of input signal is local minimum or maximum |

Repeat | Resample input at higher rate by repeating values |

Sample and Hold | Sample and hold input signal |

Triggered Signal From Workspace | Import signal samples from MATLAB workspace when triggered |

Upsample | Resample input at higher rate by inserting zeros |

Variable Fractional Delay | Delay input by time-varying fractional number of sample periods |

Variable Integer Delay | Delay input by time-varying integer number of sample periods |

Window Function | Compute and/or apply window to input signal |

Zero Crossing | Count number of times signal crosses zero in single time step |

Math Operations | |

Complex to Magnitude-Angle HDL Optimized | Compute magnitude and/or phase angle of complex signal—optimized for HDL code generation using the CORDIC algorithm |

Cumulative Product | Cumulative product of channel, column, or row elements |

Cumulative Sum | Cumulative sum of channel, column, or row elements |

Difference | Compute element-to-element difference along specified dimension of input |

Normalization | Perform vector normalization along rows, columns, or specified dimension |

dB Gain | Apply decibel gain |

Matrix Operations | |

Array-Vector Add | Add vector to array along specified dimension |

Array-Vector Divide | Divide array by vector along specified dimension |

Array-Vector Multiply | Multiply array by vector along specified dimension |

Array-Vector Subtract | Subtract vector from array along specified dimension |

Create Diagonal Matrix | Create square diagonal matrix from diagonal elements |

Extract Diagonal | Extract main diagonal of input matrix |

Extract Triangular Matrix | Extract lower or upper triangle from input matrices |

Identity Matrix | Generate matrix with ones on main diagonal and zeros elsewhere |

Matrix Concatenate | Concatenate input signals of same data type to create contiguous output signal |

Matrix Product | Multiply matrix elements along rows, columns, or entire input |

Matrix Square | Compute square of input matrix |

Matrix Sum | Sum matrix elements along rows, columns, or entire input |

Matrix 1-Norm | Compute 1-norm of matrix |

Matrix Multiply | Multiply or divide inputs |

Overwrite Values | Overwrite submatrix or subdiagonal of input |

Permute Matrix | Reorder matrix rows or columns |

Submatrix | Select subset of elements (submatrix) from matrix input |

Toeplitz | Generate matrix with Toeplitz symmetry |

Matrix Factorizations | |

LDL Factorization | Factor square Hermitian positive definite matrices into lower, upper, and diagonal components |

LU Factorization | Factor square matrix into lower and upper triangular components |

Linear System
Solvers | |

Backward Substitution | Solve UX=B for X when U is upper triangular matrix |

Forward Substitution | Solve LX=B for X when L is lower triangular matrix |

Levinson-Durbin | Solve linear system of equations using Levinson-Durbin recursion |

Switches
and Counters | |

Edge Detector | Detect transition from zero to nonzero value |

Event-Count Comparator | Detect threshold crossing of accumulated nonzero inputs |

N-Sample Switch | Switch between two inputs after specified number of sample periods |

Buffers | |

Buffer | Buffer input sequence to smaller or larger frame size |

Delay Line | Rebuffer sequence of inputs |

Queue | Store inputs in FIFO register |

Stack | Store inputs into LIFO register |

Unbuffer | Unbuffer input frame into sequence of scalar outputs |

Indexing | |

Flip | Flip input vertically or horizontally |

Multiport Selector | Distribute arbitrary subsets of input rows or columns to multiple output ports |

Overwrite Values | Overwrite submatrix or subdiagonal of input |

Selector | Select input elements from vector, matrix, or multidimensional signal |

Submatrix | Select subset of elements (submatrix) from matrix input |

Variable Selector | Select subset of rows or columns from input |

Signal Attributes | |

Check Signal Attributes | Error when input signal does or does not match selected attributes exactly |

Convert 1-D to 2-D | Reshape 1-D or 2-D input to 2-D matrix with specified dimensions |

Convert 2-D to 1-D | Convert 2-D matrix input to 1-D vector |

Data Type Conversion | Convert input signal to specified data type |

Frame Conversion | Specify sampling mode of output signal |

Inherit Complexity | Change complexity of input to match reference signal |

Was this topic helpful?