This is machine translation

Translated by Microsoft
Mouseover text to see original. Click the button below to return to the English version of the page.

Note: This page has been translated by MathWorks. Please click here
To view all translated materials including this page, select Japan from the country navigator on the bottom of this page.


Construct diffusion-rate model components


DiffusionRate = diffusion(Alpha, Sigma)


The diffusion constructor specifies the diffusion-rate component of continuous-time stochastic differential equations (SDEs). The diffusion-rate specification supports the simulation of sample paths of NVARS state variables driven by NBROWNS Brownian motion sources of risk over NPERIODS consecutive observation periods, approximating continuous-time stochastic processes.

The diffusion-rate specification can be any NVARS-by-NBROWNS matrix-valued function G of the general form:

associated with a vector-valued SDE of the form:



  • Xt is an NVARS-by-1 state vector of process variables.

  • dWt is an NBROWNS-by-1 Brownian motion vector.

  • D is an NVARS-by-NVARS diagonal matrix, in which each element along the main diagonal is the corresponding element of the state vector raised to the corresponding power of α.

  • V is an NVARS-by-NBROWNS matrix-valued volatility rate function Sigma.

The diffusion-rate specification is flexible, and provides direct parametric support for static volatilities and state vector exponents. It is also extensible, and provides indirect support for dynamic/nonlinear models via an interface. This enables you to specify virtually any diffusion-rate specification.

Input Arguments

Specify required input parameters as one of the following types:

  • A MATLAB® array. Specifying an array indicates a static (non-time-varying) parametric specification. This array fully captures all implementation details, which are clearly associated with a parametric form.

  • A MATLAB function. Specifying a function provides indirect support for virtually any static, dynamic, linear, or nonlinear model. This parameter is supported via an interface, because all implementation details are hidden and fully encapsulated by the function.


You can specify combinations of array and function input parameters as needed.

Moreover, a parameter is identified as a deterministic function of time if the function accepts a scalar time t as its only input argument. Otherwise, a parameter is assumed to be a function of time t and state X(t) and is invoked with both input arguments.

The required input parameters are:


Alpha determines the format of the parameter D. If you specify Alpha as an array, it must be an NVARS-by-1 column vector of exponents. As a deterministic function of time, when Alpha is called with a real-valued scalar time t as its only input, Alpha must produce an NVARS-by-1 column vector. If you specify Alpha as a function of time and state, it must return an NVARS-by-1 column vector of exponents when invoked with two inputs:

  • A real-valued scalar observation time t.

  • An NVARS-by-1 state vector Xt.


Sigma represents the parameter V.

If you specify Sigma as an array, it must be an NVARS-by-NBROWNS 2-dimensional matrix of instantaneous volatility rates. In this case, each row of Sigma corresponds to a particular state variable. Each column corresponds to a particular Brownian source of uncertainty, and associates the magnitude of the exposure of state variables with sources of uncertainty. As a deterministic function of time, when Sigma is called with a real-valued scalar time t as its only input, Sigma must produce an NVARS-by-NBROWNS matrix. If you specify Sigma as a function of time and state, it must return an NVARS-by-NBROWNS matrix of volatility rates when invoked with two inputs:

  • A real-valued scalar observation time t.

  • An NVARS-by-1 state vector Xt.


Although the diffusion constructor enforces no restrictions on the signs of these volatility parameters, each parameter is usually specified as a positive value.

Output Arguments


Object of class diffusion that encapsulates the composite diffusion-rate specification, with the following displayed parameters:

  • Rate: The diffusion-rate function, G. Rate is the diffusion-rate calculation engine. It accepts the current time t and an NVARS-by-1 state vector Xt as inputs, and returns an NVARS-by-1 diffusion-rate vector.

  • Alpha: Access function for the input argument Alpha.

  • Sigma: Access function for the input argument Sigma.


collapse all

Create a diffusion-rate function G:

G = diffusion(1, 0.3)  % Diffusion rate function G(t,X)
G = 
   Class DIFFUSION: Diffusion Rate Specification 
       Rate: diffusion rate function G(t,X(t))  
      Alpha: 1
      Sigma: 0.3

The diffusion object displays like a MATLAB® structure and contains supplemental information, namely, the object's class and a brief description. However, in contrast to the SDE representation, a summary of the dimensionality of the model does not appear, because the diffusion class creates a model component rather than a model. G does not contain enough information to characterize the dimensionality of a problem.


When you specify the input arguments Alpha and Sigma as MATLAB arrays, they are associated with a specific parametric form. By contrast, when you specify either Alpha or Sigma as a function, you can customize virtually any diffusion-rate specification.

Accessing the output diffusion-rate parameters Alpha and Sigma with no inputs simply returns the original input specification. Thus, when you invoke diffusion-rate parameters with no inputs, they behave like simple properties and allow you to test the data type (double vs. function, or equivalently, static vs. dynamic) of the original input specification. This is useful for validating and designing methods.

When you invoke diffusion-rate parameters with inputs, they behave like functions, giving the impression of dynamic behavior. The parameters Alpha and Sigma accept the observation time t and a state vector Xt, and return an array of appropriate dimension. Specifically, parameters Alpha and Sigma evaluate the corresponding diffusion-rate component. Even if you originally specified an input as an array, diffusion treats it as a static function of time and state, by that means guaranteeing that all parameters are accessible by the same interface.


Ait-Sahalia, Y. “Testing Continuous-Time Models of the Spot Interest Rate.” The Review of Financial Studies, Spring 1996, Vol. 9, No. 2, pp. 385–426.

Ait-Sahalia, Y. “Transition Densities for Interest Rate and Other Nonlinear Diffusions.” The Journal of Finance, Vol. 54, No. 4, August 1999.

Glasserman, P. Monte Carlo Methods in Financial Engineering. New York, Springer-Verlag, 2004.

Hull, J. C. Options, Futures, and Other Derivatives, 5th ed. Englewood Cliffs, NJ: Prentice Hall, 2002.

Johnson, N. L., S. Kotz, and N. Balakrishnan. Continuous Univariate Distributions. Vol. 2, 2nd ed. New York, John Wiley & Sons, 1995.

Shreve, S. E. Stochastic Calculus for Finance II: Continuous-Time Models. New York: Springer-Verlag, 2004.

Introduced in R2008a

Was this topic helpful?