This example shows how to identify single-input-single-output (SISO) nonlinear black box models using measured input-output data. The example uses measured data from a two-tank system to explore various model structures and identification choices.

In this example, the data variables stored in the `twotankdata.mat`

file will be used. It contains 3000 input-output data samples of a two-tank system generated using a sampling interval of 0.2 seconds. The input u(t) is the voltage [V] applied to a pump, which generates an inflow to the upper tank. A rather small hole at the bottom of this upper tank yields an outflow that goes into the lower tank, and the output y(t) of the two tank system is then the liquid level [m] of the lower tank. We create an IDDATA object `z`

to encapsulate the loaded data:

This data set is also used in the nonlinear grey box example "Two Tank System: C MEX-File Modeling of Time-Continuous SISO System" where physical equations describing the system are assumed. This example is about black box models, thus no physical equation is assumed.

load twotankdata z = iddata(y, u, 0.2, 'Name', 'Two tank system');

Let us plot the whole 3000 samples of data, for the time ranging from 0 to 600 seconds.

The input is a multi-step signal with various levels.

plot(z)

Split this data set into 3 subsets of equal size, each containing 1000 samples.

According to the data plot, the input and output signals of z2 (the middle third of the plot) is similar to the signals of z1, but those of z3 are quite different, slightly beyond the input and output ranges of z1.

We shall estimate models with z1, and evaluate them on z2 and z3. In some sense, z2 allows to evaluate the interpolation ability of the models, and z3 allows to evaluate their extrapolation ability to some extent.

z1 = z(1:1000); z2 = z(1001:2000); z3 = z(2001:3000);

The first step in estimating nonlinear black box models is to choose model orders. For an IDNLARX model, Orders = [na nb nk], defining the numbers of past outputs, past inputs and the input delay used to predict the current output.

Usually model orders are chosen by trials and errors. Sometimes it is useful to try linear ARX models first in order to get hints about model orders. So let us first try the tool for linear ARX model orders selection.

V = arxstruc(z1,z2,struc(1:5, 1:5,1:5)); nn = selstruc(V,'aic') % selection of nn=[na nb nk] by Akaike's information criterion (AIC)

nn = 5 1 3

The AIC criterion has selected nn = [na nb nk] = [5 1 3], meaning that, in the selected ARX model structure, y(t) is predicted by the 6 regressors y(t-1),y(t-1),...,y(t-5) and u(t-3). We will try to use these values in nonlinear models.

In an IDNLARX model, the model output is a nonlinear function of regressors, like model_output(t) = F(y(t-1),y(t-1),...,y(t-5), u(t-3)).

IDNLARX models are typically estimated with the syntax:

M = NLARX(Data, Orders, Nonlinearity).

It is similar to the linear ARX command, with the additional argument Nonlinearity specifying the type of nonlinearity estimator.

To estimate an IDNLARX model, after the choice of model orders, we should choose the nonlinearity estimator to be used. Let us first try the WAVENET estimator.

mw1 = nlarx(z1,[5 1 3], wavenet);

The number of units (wavenet functions) in the WAVENET estimator has been automatically chosen. It can be accessed as shown below.

mw1.Nonlinearity.NumberOfUnits

ans = 3

Examine the result by comparing the output simulated with the estimated model and the output in the estimation data z1:

compare(z1,mw1);

The first model was not quite satisfactory, so let us try to modify some properties of the model. Instead of letting the estimation algorithm automatically choose the number of units in the WAVENET estimator, this number can be explicitly specified.

```
mw2 = nlarx(z1,[5 1 3], wavenet('NumberOfUnits',8));
```

Default InputName and OutputName have been used.

mw2.InputName mw2.OutputName

ans = cell 'u1' ans = cell 'y1'

The regressors of the IDNLARX model can be viewed with the command getreg. The regressors are made from `mw2.InputName`

, `mw2.OutputName`

and time delays.

getreg(mw2)

Regressors: y1(t-1) y1(t-2) y1(t-3) y1(t-4) y1(t-5) u1(t-3)

An important property of IDNLARX models is NonlinearRegressors. The output of an IDNLARX model is a function of regressors. Usually this function has a linear block and a nonlinear block. The model output is the sum of the outputs of the two blocks. In order to reduce model complexity, a subset of regressors can be chosen to enter the nonlinear block. These regressors are referred to as "nonlinear regressors".

Nonlinear regressors can be specified as a vector of regressor indices in the order of the regressors returned by GETREG. For the example of mw2, the entire list of regressors is displayed below, and NonlinearRegressors=[1 2 6] corresponds to y1(t-1), y1(t-2) and u1(t-3) in the following list.

getreg(mw2)

Regressors: y1(t-1) y1(t-2) y1(t-3) y1(t-4) y1(t-5) u1(t-3)

Nonlinear regressors can be indicated by the Property-Value pair as in the following example. Notice the short-hand 'nlreg'='NonlinearRegressors'.

%mw3 = nlarx(z1,[5 1 3], wavenet, 'NonlinearRegressors', [1 2 6]); mw3 = nlarx(z1,[5 1 3], wavenet, 'nlreg', [1 2 6]); % using short-hand notation getreg(mw3, 'nonlinear') % get nonlinear regressors

Nonlinear regressors: y1(t-1) y1(t-2) u1(t-3)

Instead of regressor indices, some keywords can also be used to indicate nonlinear regressors: 'input' for regressors consisting of delayed inputs, and 'output' for regressors consisting of delayed outputs. In the following example, 'input' indicates the only input regressor u1(t-3).

mw4 = nlarx(z1,[5 1 3],wavenet,'nlreg','input'); mw4.nlreg % 'nlreg' is the short-hand of 'NonlinearRegressors' getreg(mw4,'nonlinear') % get nonlinear regressor

ans = 6 Nonlinear regressors: u1(t-3)

To automatically try all the possible subsets of regressors as nonlinear regressors and to choose the one resulting in the lowest simulation error, use the value NonlinearRegressors='search'. This exhaustive search usually takes a long time. It is recommended to turn on the iteration display when using the search option.

This example may take some time.

opt = nlarxOptions('Display','on'); mws = nlarx(z1,[5 1 3], wavenet, 'nlreg', 'search', opt);

The result of the search can be accessed in mws.nlreg The resulting value mws.nlreg=[4 6] means that the 4th and 6th regressors are nonlinear in the following list of regressors. In other words, y1(t-4) and u1(t-3) are used as nonlinear regressors.

mws.nlreg getreg(mws)

ans = 4 6 Regressors: y1(t-1) y1(t-2) y1(t-3) y1(t-4) y1(t-5) u1(t-3)

Different models, both linear and nonlinear, can be compared together in the same COMPARE command.

mlin = arx(z1,[5 1 3]); compare(z1,mlin,mw2,mws);

Now let us see how mws behaves on the data set z2.

compare(z2,mws);

and on the data set z3.

compare(z3,mws);

Function PLOT may be used to view the nonlinearity responses of various IDNLARX models.

```
plot(mw2,mws) % plot nonlinearity response as a function of selected regressors
```

At the place of WAVENET, other nonlinearity estimators can be used. Try the SIGMOIDNET estimator.

```
ms1 = nlarx(z1,[5 1 3], sigmoidnet('NumberOfUnits', 8));
compare(z1,ms1)
```

Now evaluate the new model on the data set z2.

compare(z2,ms1);

and on the data set z3.

compare(z3,ms1);

CUSTOMNET is similar to SIGMOIDNET, but instead of the sigmoid unit function, the user can define other unit functions in MATLAB files. This example uses the gaussunit function defined in the function gaussunit.m.

TREEPARTITION is another nonlinearity estimator.

```
mc1 = nlarx(z1,[5 1 3], customnet(@gaussunit),'nlreg',[3 5 6]);
mt1 = nlarx(z1,[5 1 3], treepartition);
```

Neural networks created with the aid of the NNTB can also be used. This requires NNTB license.

Here, we will create a single-output network with an unknown number of inputs (denote by input size of zero in the network object). The number of inputs is set to the number of regressors (as determined by model orders) in the IDNLARX model during the estimation process automatically.

Compare responses of models `mc1`

and `mt1`

to data `z1`

compare(z1, mc1, mt1) if exist('feedforwardnet','file')==2 % check if Neural Network Toolbox is available % This example is run only if the NNTB license is available. ff = feedforwardnet([5 20]); ff.layers{2}.transferFcn = 'radbas'; ff.trainParam.epochs = 50; mn1 = nlarx(z1,[5 1 3], neuralnet(ff)); % estimation with neuralnet nonlinearity compare(z1, mn1) % compare fit to estimation data end

A Hammerstein-Wiener model is composed of up to 3 blocks: a linear transfer function block is preceded by a nonlinear static block and/or followed by another nonlinear static block. It is called a Wiener model if the first nonlinear static block is absent, and a Hammerstein model if the second nonlinear static block is absent.

IDNLHW models are typically estimated with the syntax:

M = NLHW(Data, Orders, InputNonlinearity, OutputNonlinearity).

where Orders = [nb bf nk] specifies the orders and delay of the linear transfer function, InputNonlinearity and OutputNonlinearity specify the nonlinearity estimators for the two nonlinear blocks. The linear output error (OE) model corresponds to the case of trivial identity nonlinearities.

The PWLINEAR (piecewise linear) nonlinearity estimator is useful in general IDNLHW models.

Notice that, in Orders = [nb nf nk], nf specifies the number of poles of the linear transfer function, somewhat related to the `na`

order of the IDNLARX model

mhw1 = nlhw(z1, [1 5 3], pwlinear, pwlinear);

The result can be evaluated with COMPARE as before.

compare(z1,mhw1)

Model properties can be visualized by the PLOT command.

Click on the block-diagram to choose the view of the input nonlinearity (UNL), the linear block or the output nonlinearity (YNL).

For the linear block, it is possible to choose the type of plots within Step response, Bode plot, Impulse response and Pole-zero map.

plot(mhw1)

The break points of the two piecewise linear estimators can be examined (notice that the short-hands 'u'='Input', 'y'='Output', 'nl'='Nonlinearity' can be used). This is a two row matrix, the first row corresponds to the input and the second row to the output of the PWLINEAR estimator.

mhw1.unl.BreakPoints

ans = Columns 1 through 7 2.6179 3.3895 4.1611 4.9327 5.6297 6.3573 7.0850 -2.2681 -1.6345 0.1033 2.2067 3.7696 4.9984 5.8644 Columns 8 through 10 7.8127 8.2741 9.2257 6.4075 6.5725 9.1867

The SATURATION and DEADZONE estimators can be used if such nonlinearities are supposed to be present in the system.

mhw2 = nlhw(z1, [1 5 3], deadzone, saturation); compare(z1,mhw2)

The absence of a nonlinearity is indicated by the UNITGAIN object, or by the empty "[]" value. Abbreviated names of nonlinearity estimators can also be used.

mhw3 = nlhw(z1, [1 5 3], 'dead',unitgain); mhw4 = nlhw(z1, [1 5 3], [],'satur');

The limit values of DEADZONE and SATURATION can be respectively examined.

mhw2.unl.ZeroInterval mhw2.ynl.LinearInterval

ans = 0.9856 3.5657 ans = 0.0274 0.5660

The initial guess of ZeroInterval for DEADZONE or LinearInterval for SATURATION can be indicated in the estimators:

mhw5 = nlhw(z1, [1 5 3], deadzone([0.1 0.2]), saturation([-1 1]));

The estimation algorithm options can be specified using the NLHWOPTIONS command.

```
opt = nlhwOptions();
opt.SearchMethod = 'gna';
opt.SearchOption.MaxIter = 3;
mhw6 = nlhw(z1, [1 5 3], deadzone, saturation, opt);
```

An already estimated model can be refined by more estimation iterations

Evaluated on the estimation data z1, mhw7 should have a better fit than mhw6.

mhw7 = nlhw(z1, mhw6, opt); compare(z1, mhw6, mhw7)

The nonlinearity estimators PWLINEAR, SATURATION and DEADZONE have been mainly designed for use in IDNLHW models. They can only estimate single variable nonlinearities. The other more general nonlinearity estimators, SIGMOIDNET, CUSTOMNET and WAVENET, can also be used in IDNLHW models. However, the non-differentiable estimators TREEPARTITION and NEURALNET are not applicable, because the estimation of IDNLHW models needs the derivatives of the nonlinearity estimators in iterative algorithms. Type "idprops idnlestimators" for a summary of nonlinearity estimators.

Was this topic helpful?