Documentation |
Impulse response plot of dynamic system; impulse response data
impulse(sys)
impulse(sys,Tfinal)
impulse(sys,t)
impulse(sys1,sys2,...,sysN)
impulse(sys1,sys2,...,sysN,Tfinal)
impulse(sys1,sys2,...,sysN,t)
[y,t] = impulse(sys)
[y,t] = impulse(sys,Tfinal)
y = impulse(sys,t)
[y,t,x] = impulse(sys)
[y,t,x,ysd] = impulse(sys)
impulse calculates the unit impulse response of a dynamic system model. For continuous-time dynamic systems, the impulse response is the response to a Dirac input δ(t). For discrete-time systems, the impulse response is the response to a unit area pulse of length Ts and height 1/Ts, where Ts is the sampling time of the system. (This pulse approaches δ(t) as Ts approaches zero.) For state-space models, impulse assumes initial state values are zero.
impulse(sys) plots the impulse response of the dynamic system model sys. This model can be continuous or discrete, and SISO or MIMO. The impulse response of multi-input systems is the collection of impulse responses for each input channel. The duration of simulation is determined automatically to display the transient behavior of the response.
impulse(sys,Tfinal) simulates the impulse response from t = 0 to the final time t = Tfinal. Express Tfinal in the system time units, specified in the TimeUnit property of sys. For discrete-time systems with unspecified sampling time (Ts = -1), impulse interprets Tfinal as the number of sampling periods to simulate.
impulse(sys,t) uses the user-supplied time vector t for simulation. Express t in the system time units, specified in the TimeUnit property of sys. For discrete-time models, t should be of the form Ti:Ts:Tf, where Ts is the sample time. For continuous-time models, t should be of the form Ti:dt:Tf, where dt becomes the sample time of a discrete approximation to the continuous system (see Algorithms). The impulse command always applies the impulse at t=0, regardless of Ti.
To plot the impulse responses of several models sys1,..., sysN on a single figure, use:
impulse(sys1,sys2,...,sysN)
impulse(sys1,sys2,...,sysN,Tfinal)
impulse(sys1,sys2,...,sysN,t)
As with bode or plot, you can specify a particular color, linestyle, and/or marker for each system, for example,
impulse(sys1,'y:',sys2,'g--')
See "Plotting and Comparing Multiple Systems" and the bode entry in this section for more details.
When invoked with output arguments:
[y,t] = impulse(sys)
[y,t] = impulse(sys,Tfinal)
y = impulse(sys,t)
impulse returns the output response y and the time vector t used for simulation (if not supplied as an argument to impulse). No plot is drawn on the screen. For single-input systems, y has as many rows as time samples (length of t), and as many columns as outputs. In the multi-input case, the impulse responses of each input channel are stacked up along the third dimension of y. The dimensions of y are then
For state-space models only:
[y,t,x] = impulse(sys)
(length of t) × (number of outputs) × (number of inputs)
and y(:,:,j) gives the response to an impulse disturbance entering the jth input channel. Similarly, the dimensions of x are
(length of t) × (number of states) × (number of inputs)
[y,t,x,ysd] = impulse(sys) returns the standard deviation YSD of the response Y of an identified system SYS. YSD is empty if SYS does not contain parameter covariance information.
Plot the impulse response of the second-order state-space model
$$\begin{array}{c}\left[\begin{array}{l}{\dot{x}}_{1}\\ {\dot{x}}_{2}\end{array}\right]=\left[\begin{array}{cc}-0.5572& -0.7814\\ 0.7814& 0\end{array}\right]\left[\begin{array}{l}{x}_{1}\\ {x}_{2}\end{array}\right]+\left[\begin{array}{cc}1& -1\\ 0& 2\end{array}\right]\left[\begin{array}{l}{u}_{1}\\ {u}_{2}\end{array}\right]\\ y=\left[\begin{array}{cc}1.9691& 6.4493\end{array}\right]\left[\begin{array}{l}{x}_{1}\\ {x}_{2}\end{array}\right]\end{array}$$
a = [-0.5572 -0.7814;0.7814 0]; b = [1 -1;0 2]; c = [1.9691 6.4493]; sys = ss(a,b,c,0); impulse(sys)
The left plot shows the impulse response of the first input channel, and the right plot shows the impulse response of the second input channel.
You can store the impulse response data in MATLAB^{®} arrays by
[y,t] = impulse(sys);
Because this system has two inputs, y is a 3-D array with dimensions
size(y)
ans = 139 1 2
(the first dimension is the length of t). The impulse response of the first input channel is then accessed by
ch1 = y(:,:,1); size(ch1)
ans = 139 1
Fetch the impulse response and the corresponding 1 std uncertainty of an identified linear system .
load(fullfile(matlabroot, 'toolbox', 'ident', 'iddemos', 'data', 'dcmotordata')); z = iddata(y, u, 0.1, 'Name', 'DC-motor'); set(z, 'InputName', 'Voltage', 'InputUnit', 'V'); set(z, 'OutputName', {'Angular position', 'Angular velocity'}); set(z, 'OutputUnit', {'rad', 'rad/s'}); set(z, 'Tstart', 0, 'TimeUnit', 's'); model = tfest(z,2); [y,t,~,ysd] = impulse(model,2); % Plot 3 std uncertainty subplot(211) plot(t,y(:,1), t,y(:,1)+3*ysd(:,1),'k:', t,y(:,1)-3*ysd(:,1),'k:') subplot(212) plot(t,y(:,2), t,y(:,2)+3*ysd(:,2),'k:', t,y(:,2)-3*ysd(:,2),'k:')
The impulse response of a continuous system with nonzero D matrix is infinite at t = 0. impulse ignores this discontinuity and returns the lower continuity value Cb at t = 0.
impulseest | initial | lsim | ltiview | step