Documentation

This is machine translation

Translated by Microsoft
Mouseover text to see original. Click the button below to return to the English verison of the page.

Note: This page has been translated by MathWorks. Please click here
To view all translated materals including this page, select Japan from the country navigator on the bottom of this page.

sgrid

Generate s-plane grid of constant damping factors and natural frequencies

Syntax

sgrid
sgrid(z,wn)

Description

sgrid generates, for pole-zero and root locus plots, a grid of constant damping factors from zero to one in steps of 0.1 and natural frequencies from zero to 10 rad/sec in steps of one rad/sec, and plots the grid over the current axis. If the current axis contains a continuous s-plane root locus diagram or pole-zero map, sgrid draws the grid over the plot.

sgrid(z,wn) plots a grid of constant damping factor and natural frequency lines for the damping factors and natural frequencies in the vectors z and wn, respectively. If the current axis contains a continuous s-plane root locus diagram or pole-zero map, sgrid(z,wn) draws the grid over the plot.

Alternatively, you can select Grid from the right-click menu to generate the same s-plane grid.

Examples

Plot s-plane grid lines on the root locus for the following system.

H(s)=2s2+5s+1s2+2s+3

You can do this by typing

H = tf([2 5 1],[1 2 3])
Transfer function:
2 s^2 + 5 s + 1
---------------
 s^2 + 2 s + 3
rlocus(H)
sgrid

See Also

| |

Introduced in R2012a

Was this topic helpful?