Quantcast

Documentation Center

  • Trial Software
  • Product Updates

DataBits

Specify number of data bits to transmit

Description

You can configure DataBits to be 5, 6, 7, or 8. Data is transmitted as a series of five, six, seven, or eight bits with the least significant bit sent first. At least seven data bits are required to transmit ASCII characters. Eight bits are required to transmit binary data. Five and six bit data formats are used for specialized communication equipment.

    Note   Both the computer and the instrument must be configured to transmit the same number of data bits.

In addition to the data bits, the serial data format consists of a start bit, one or two stop bits, and possibly a parity bit. You specify the number of stop bits with the StopBits property, and the type of parity checking with the Parity property.

Characteristics

Usage

Serial port, VISA-serial

Read only

Never

Data type

Double

Values

DataBits can be 5, 6, 7, or 8. The default value is 8.

See Also

Properties

Parity, StopBits

Was this topic helpful?