Read data asynchronously from instrument
An interface object.
The number of bytes to read from the instrument.
an asynchronous read operation.
reads, at most, the number of bytes specified by
size is greater than the difference between
InputBufferSize property value and the
value, an error is returned.
This example creates the serial port object
s to a Tektronix® TDS 210 oscilloscope,
s on a Windows® machine to read
data asynchronously only if
readasync is issued,
and configures the instrument to return the peak-to-peak value of
the signal on channel 1.
s = serial('COM1'); fopen(s) s.ReadAsyncMode = 'manual'; fprintf(s,'Measurement:Meas1:Source CH1') fprintf(s,'Measurement:Meas1:Type Pk2Pk') fprintf(s,'Measurement:Meas1:Value?')
Initially, there is no data in the input buffer.
s.BytesAvailable ans = 0
Begin reading data asynchronously from the instrument using
When the read operation is complete, return the data to the MATLAB® workspace
readasync(s) s.BytesAvailable ans = 15 out = fscanf(s) out = 2.0399999619E0 fclose(s)
Before you can read data, you must connect
the instrument with the
A connected interface object has a
open. An error is returned if you attempt
to perform a read operation while
obj is not connected
to the instrument.
For serial port, TCPIP, UDP, and VISA-serial objects, you should
readasync only when you configure the
readasync is ignored
if used when
TransferStatus property indicates if
an asynchronous read or write operation is in progress. For all interface
objects, you cannot use
readasync while a read
operation is in progress. For serial port and VISA-serial objects,
you can write data while an asynchronous read is in progress because
serial ports have separate read and write pins. You can stop asynchronous
read and write operations with the
You can monitor the amount of data stored in the input buffer
BytesAvailable property. Additionally,
you can use the
BytesAvailableFcn property to
execute a callback function when the terminator or the specified amount
of data is read.
An asynchronous read operation with
when one of these conditions is met:
The terminator is read. For serial port, TCPIP, UDP,
and VISA-serial objects, the terminator is given by the
Note that for UDP objects,
For all other interface objects except VISA-RSIB, the terminator
is given by the
The time specified by the
The specified number of bytes is read.
The input buffer is filled.
A datagram has been received (UDP objects only if
The EOI line is asserted (GPIB and VXI instruments only).
For serial port, TCPIP, UDP, and VISA-serial objects,
be slow because it checks for the terminator. To increase speed, you
might want to configure
continuously return data to the input buffer as soon as it is available
from the instrument.