Documentation

This is machine translation

Translated by Microsoft
Mouseover text to see original. Click the button below to return to the English verison of the page.

Note: This page has been translated by MathWorks. Please click here
To view all translated materals including this page, select Japan from the country navigator on the bottom of this page.

ltePDCCHInfo

PDCCH resource information

Syntax

Description

example

info = ltePDCCHInfo(enb) returns a structure info containing information about the Physical Downlink Control Channel (PDCCH) subframe resources.

Within a non-MBMS downlink subframe, the first info.NSymbols OFDM symbols represent its control region and carry the PCFICH, PHICH and PDCCH. info.NRE indicates the number of non-reference resource elements (RE), not assigned to the PCFICH or PHICH, that are associated with PDCCH transmission. These resources carry the set of PDCCH where each PDCCH carries a single encoded DCI message. Each PDCCH can be transmitted on 1,2,4, or 8 control channel elements (CCE), where 1 CCE = 9 REG = 36 RE = 72 bits. As such, not all the NRE elements can carry actual PDCCH instances, with (info.NREinfo.NREUsed) being unavailable for PDCCH transmission.

Examples

collapse all

Get information about the PDCCH subframe resources for RMC R.0.

enb = lteRMCDL('R.0');
info = ltePDCCHInfo(enb)
info = 

  struct with fields:

        NREG: 113
         NRE: 452
        NCCE: 12
    NREGUsed: 108
     NREUsed: 432
        MTot: 904
    NSymbols: 3

Input Arguments

collapse all

Cell-wide settings, specified as a scalar structure. enb is a structure having the following fields.

Parameter FieldRequired or OptionalValuesDescription
NDLRBRequiredInteger within the range (6,...,110)

Number of downlink resource blocks. (NRBDL)

CyclicPrefixOptional

'Normal' (default), 'Extended'

Cyclic prefix length

CellRefPRequired

1, 2, 4

Number of cell-specific reference signal (CRS) antenna ports

CFIRequired

1, 2, 3

Control format indicator value

NgRequired

'Sixth', 'Half', 'One', 'Two'

PHICH group multiplier

DuplexModeOptional

'FDD' (default), 'TDD'

Duplexing mode, specified as:

  • 'FDD' for Frequency Division Duplex or

  • 'TDD' for Time Division Duplex

NSubframeRequired

0 (default), nonnegative scalar integer

Subframe number

The following field is required when DuplexMode is set to 'TDD'.
TDDConfigOptional

0 (default), 1, 2, 3, 4, 5, 6

Uplink–downlink configuration

Data Types: struct

Output Arguments

collapse all

PDCCH subframe resource information, returned as a structure. info contains the following fields.

Parameter FieldValuesDescription
NRE

Numeric scalar

Total number of resource elements (REs) associated with PDCCHs (4×NREG)

NREG

Numeric scalar

Total number of resource element groups (REGs) associated with PDCCHs (4×NRE)

MTot

Numeric scalar

Total number of bits associated with PDCCHs, returned as a numeric scalar (8×NREG). MTot is the maximum number of input bits that can be transmitted on the NRE symbols (MTot = 2 × NRE = 8 × NREG).

NCCE

Numeric scalar

Number of control channel elements available for actual PDCCH usage

NREGUsed

Numeric scalar

Number of resource element groups (REGs) available for actual PDCCH usage

NREUsed

Numeric scalar

Number of resource elements (REs) available for actual PDCCH usage

NSymbols

Numeric scalar

Total number of OFDM symbols spanned by the PDCCH

Data Types: struct

Introduced in R2014a

Was this topic helpful?