|On this page…|
Low-level file I/O functions allow the most control over reading or writing data to a file. However, these functions require that you specify more detailed information about your file than the easier-to-use high-level functions, such as importdata. For more information on the high-level functions that read text files, see Ways to Import Text Files.
If the high-level functions cannot import your data, use one of the following:
fscanf, which reads formatted data in a text or ASCII file; that is, a file you can view in a text editor. For more information, see Reading Data in a Formatted Pattern.
fgetl and fgets, which read one line of a file at a time, where a newline character separates each line. For more information, see Reading Data Line-by-Line.
fread, which reads a stream of data at the byte or bit level. For more information, see Import Binary Data with Low-Level I/O.
For additional information, see:
To import text files that importdata and textscan cannot read, consider using fscanf. The fscanf function requires that you describe the format of your file, but includes many options for this format description.
For example, create a text file mymeas.dat as shown. The data in mymeas.dat includes repeated sets of times, dates, and measurements. The header text includes the number of sets of measurements, N:
Measurement Data N=3 12:00:00 01-Jan-1977 4.21 6.55 6.78 6.55 9.15 0.35 7.57 NaN 7.92 8.49 7.43 7.06 9.59 9.33 3.92 0.31 09:10:02 23-Aug-1990 2.76 6.94 4.38 1.86 0.46 3.17 NaN 4.89 0.97 9.50 7.65 4.45 8.23 0.34 7.95 6.46 15:03:40 15-Apr-2003 7.09 6.55 9.59 7.51 7.54 1.62 3.40 2.55 NaN 1.19 5.85 5.05 6.79 4.98 2.23 6.99
As with any of the low-level I/O functions, before reading, open the file with fopen, and obtain a file identifier. By default, fopen opens files for read access, with a permission of 'r'.
When you finish processing the file, close it with fclose(fid).
Describe the data in the file with format specifiers, such as '%s' for a string, '%d' for an integer, or '%f' for a floating-point number. (For a complete list of specifiers, see the fscanf reference page.)
To skip literal characters in the file, include them in the format description. To skip a data field, use an asterisk ('*') in the specifier.
For example, consider the header lines of mymeas.dat:
Measurement Data % skip 2 strings, go to next line: %*s %*s\n N=3 % ignore 'N=', read integer: N=%d\n % go to next line: \n 12:00:00 01-Jan-1977 4.21 6.55 6.78 6.55 ...
To read the headers and return the single value for N:
N = fscanf(fid, '%*s %*s\nN=%d\n\n', 1);
By default, fscanf reapplies your format description until it cannot match the description to the data, or it reaches the end of the file.
Optionally, specify the number of values to read, so that fscanf does not attempt to read the entire file. For example, in mymeas.dat, each set of measurements includes a fixed number of rows and columns:
measrows = 4; meascols = 4; meas = fscanf(fid, '%f', [measrows, meascols])';
There are several ways to store mymeas.dat in the MATLAB workspace. In this case, read the values into a structure. Each element of the structure has three fields: mtime, mdate, and meas.
Note: fscanf fills arrays with numeric values in column order. To make the output array match the orientation of numeric data in a file, transpose the array.
filename = 'mymeas.dat'; measrows = 4; meascols = 4; % open the file fid = fopen(filename); % read the file headers, find N (one value) N = fscanf(fid, '%*s %*s\nN=%d\n\n', 1); % read each set of measurements for n = 1:N mystruct(n).mtime = fscanf(fid, '%s', 1); mystruct(n).mdate = fscanf(fid, '%s', 1); % fscanf fills the array in column order, % so transpose the results mystruct(n).meas = ... fscanf(fid, '%f', [measrows, meascols])'; end % close the file fclose(fid);
MATLAB provides two functions that read lines from files and store them in string vectors: fgetl and fgets. The fgets function copies the newline character to the output string, but fgetl does not.
The following example uses fgetl to read an entire file one line at a time. The function litcount determines whether an input literal string (literal) appears in each line. If it does, the function prints the entire line preceded by the number of times the literal string appears on the line.
function y = litcount(filename, literal) % Search for number of string matches per line. fid = fopen(filename); y = 0; tline = fgetl(fid); while ischar(tline) matches = strfind(tline, literal); num = length(matches); if num > 0 y = y + num; fprintf(1,'%d:%s\n',num,tline); end tline = fgetl(fid); end fclose(fid);
Create an input data file called badpoem:
Oranges and lemons, Pineapples and tea. Orangutans and monkeys, Dragonflys or fleas.
To find out how many times the string 'an' appears in this file, call litcount:
2: Oranges and lemons, 1: Pineapples and tea. 3: Orangutans and monkeys, ans = 6
When you read a portion of your data at a time, you can use feof to check whether you have reached the end of the file. feof returns a value of 1 when the file pointer is at the end of the file. Otherwise, it returns 0.
Note: Opening an empty file does not move the file position indicator to the end of the file. Read operations, and the fseek and frewind functions, move the file position indicator.
For example, suppose that the hypothetical file mymeas.dat has the following form, with no information about the number of measurement sets. Read the data into a structure with fields for mtime, mdate, and meas:
12:00:00 01-Jan-1977 4.21 6.55 6.78 6.55 9.15 0.35 7.57 NaN 7.92 8.49 7.43 7.06 9.59 9.33 3.92 0.31 09:10:02 23-Aug-1990 2.76 6.94 4.38 1.86 0.46 3.17 NaN 4.89 0.97 9.50 7.65 4.45 8.23 0.34 7.95 6.46
To read the file:
filename = 'mymeas.dat'; measrows = 4; meascols = 4; % open the file fid = fopen(filename); % make sure the file is not empty finfo = dir(filename); fsize = finfo.bytes; if fsize > 0 % read the file block = 1; while ~feof(fid) mystruct(block).mtime = fscanf(fid, '%s', 1); mystruct(block).mdate = fscanf(fid, '%s', 1); % fscanf fills the array in column order, % so transpose the results mystruct(block).meas = ... fscanf(fid, '%f', [measrows, meascols])'; block = block + 1; end end % close the file fclose(fid);
If you use fgetl or fgets in a control loop, feof is not always the best way to test for end of file. As an alternative, consider checking whether the value that fgetl or fgets returns is a character string.
For example, the function litcount described in Reading Data Line-by-Line includes the following while loop and fgetl calls :
y = 0; tline = fgetl(fid); while ischar(tline) matches = strfind(tline, literal); num = length(matches); if num > 0 y = y + num; fprintf(1,'%d:%s\n',num,tline); end tline = fgetl(fid); end
This approach is more robust than testing ~feof(fid) for two reasons:
If fgetl or fgets find data, they return a string. Otherwise, they return a number (-1).
After each read operation, fgetl and fgets check the next character in the file for the end-of-file marker. Therefore, these functions sometimes set the end-of-file indicator before they return a value of -1. For example, consider the following three-line text file. Each of the first two lines ends with a newline character, and the third line contains only the end-of-file marker:
Three sequential calls to fgetl yield the following results:
t1 = fgetl(fid); % t1 = '123', feof(fid) = false t2 = fgetl(fid); % t2 = '456', feof(fid) = true t3 = fgetl(fid); % t3 = -1, feof(fid) = true
This behavior does not conform to the ANSI specifications for the related C language functions.
Encoding schemes support the characters required for particular alphabets, such as those for Japanese or European languages. Common encoding schemes include US-ASCII or UTF-8.
If you do not specify an encoding scheme, fopen opens files for processing using the default encoding for your system. To determine the default, open a file, and call fopen again with the syntax:
[filename, permission, machineformat, encoding] = fopen(fid);
If you specify an encoding scheme when you open a file, the following functions apply that scheme: fscanf, fprintf, fgetl, fgets, fread, and fwrite.
For a complete list of supported encoding schemes, and the syntax for specifying the encoding, see the fopen reference page.